• Acer Nitro 5 LA-F951P - zwarcie

It is currently 7 January 2025, 12:07

Acer Nitro 5 LA-F951P - zwarcie

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Acer Nitro 5 LA-F951P - zwarcie

by franekx6 • 17 December 2024, 09:25
Witam

Laptop: Acer Nitro 5 AN515-53
PCB: DH5VF LA-F951P Rev:1A
CPU: SR3Z0
GPU: N17P-G0-A1
Mostek: SR40B
KBC: KB9022Q D

Płyta ma zwarcie. Po podłączeniu pod zasilacz laboratoryjny załącza się zabezpieczenie. Wstępnie uszkodzony (fizycznie wypalona dziura) układ PU1501 (Z5038QI). Układ wymieniłem, po podłączeniu pod zasilacz zwarcia nie było ale jak zacząłem ją włączać kilka razy to w końcu znów doszło to tego samego efektu czyli zasilacz się zabezpiecza.
Obecnie nagrzewa się PU1501 (Z5038QI) oraz mosfet PQ311.
Proszę o pomoc bardziej doświadczonych Kolegów w namierzeniu usterki.

Pozdrawiam

Re: Acer Nitro 5 LA-F951P - zwarcie

by Google Adsense [BOT] • 17 December 2024, 09:25

#2 Re: Acer Nitro 5 LA-F951P - zwarcie

by wof • 17 December 2024, 10:03
as PU1501 is for +VGA_CORE I would expect it had shorted input/output and as result dead GPU (20V goes directly to +VGA_CORE) ...and next this short goes to +19VB_NVVDD over PL1502/PL1503 to +19VB... thats why PQ311 is heating(could also be shorted already) ....for test purposes you can remove/open PL1502/PL1503 to run mb without +19VB_NVVDD line.

#3 Re: Acer Nitro 5 LA-F951P - zwarcie

by franekx6 • 17 December 2024, 10:37
Hello wof thanks for answer!
I removed PL1502 and PL1503 and motherborard run with image on the matrix. Now the laptop can work normally but without an external graphics card?
In this case, can I be sure that the N17P-G0-A1 needs to be replaced?

#4 Re: Acer Nitro 5 LA-F951P - zwarcie

by wof • 17 December 2024, 12:14
you can do "shortcircuit test" in +VGA_CORE line, but most probably GPU is KO and is causing short and blow of the power IC....before placing new GPU, replace both PU1501/PU1502 and check +VGA_CORE line work and other corresponding gpu lines, especially resistances without gpu - be sure you dont have another fault (..like VRAM etc)...

#5 Re: Acer Nitro 5 LA-F951P - zwarcie

by franekx6 • 17 December 2024, 14:33
to short circuit test I have to install PL1502 and PL1503 next remove PL1501 and give 0.8V to pins 3,4 of PL1501 to what value should I give the current?

#6 Re: Acer Nitro 5 LA-F951P - zwarcie

by wof • 17 December 2024, 15:39
dont install PL1502 and PL1503 - let the shorted branch be disconnected from rest of the board....before doing test, remove already shorted parts (...PU1501, ???), start with current around 1A

#7 Re: Acer Nitro 5 LA-F951P - zwarcie

by franekx6 • 18 December 2024, 08:09
At what point should voltage be applied during a short circuit test?

#8 Re: Acer Nitro 5 LA-F951P - zwarcie

by wof • 18 December 2024, 08:47
you are testing shorted +VGA_CORE line - it starts on output of PU1501/PU1502 ....you can connect to any suitable point in this line, doesnt play role which one..I would go behind PL1501/PL1504

Similar Topics
  Acer AN515-53-52FA mb: DH5VF la-F951P - zwarcie na zasilaniu  [SOLVED]
  Acer Nitro AN515-54 LA-H501P - zwarcie w układzie zasilania  [SOLVED]
Acer Nitro 5 AN515-55-512J N20C1 FH52M LA-J891P Zwarcie podczas diagnostyki,0 reakcj
Acer nitro 5 model N20c1- zwarcie ,nie włacza się.
Acer Nitro N18C3 - Zwarcie na głównej lini zasilania
Acer Nitro 5 LA-j891P brak +VCC_CORE

Who is online

Users browsing this forum: No registered users and 5 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.