• HP 14-ca3003na - identyfikacja elementów

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 HP 14-ca3003na - identyfikacja elementów


by krzysztof000 24 May 2024, 19:45
Witam,

Model laptopa: HP 14-ca3003na
Model płyty: G7AL-2G DAG7ALMB8C0 Rev:C

Mam wrażenie, że na płycie głównej w okolicy n.2 i n.3 kości biosu brakuje rezystorów.
Ktoś grzebał przy biosie i musiał coś zdmuchnąć w okolicy.

Załączam zdjęcie jak to u mnie wygląda:

Image

Czy ktoś może umieścić zdjęcie wyraźnej jakości w okolicy biosu jak to powinno wyglądać i o jakich parametrach rezystorów brakuje?

Dziękuję za pomoc.

Re: HP 14-ca3003na - identyfikacja elementów


by Google Adsense [BOT] 24 May 2024, 19:45

#2 Re: HP 14-ca3003na - identyfikacja elementów


by matic 25 May 2024, 17:39
Hello!

The missing components are probably as follows:
Image
A= R5609 - Resistor 33Ω/5%, package 0201
B= R5621 - Resistor 15Ω/1%, package 0201
C= R5620 - Factory not soldered to the board

The schematic for this board is currently unavailable, just BoardView without the component values, so I concluded their values based on similar boards.

#3 Re: HP 14-ca3003na - identyfikacja elementów


by krzysztof000 26 May 2024, 18:58
a w pozycji A po prawej stronie widzę, że brakuje pada lutowniczego, jak to mogę rozwiązać?

#4 Re: HP 14-ca3003na - identyfikacja elementów


by matic 27 May 2024, 08:41
It's connected to the pads marked in yellow.
Image

#5 Re: HP 14-ca3003na - identyfikacja elementów


by krzysztof000 27 May 2024, 10:41
A bez tych brakujących rezystorów płyta powinna się uruchomić?

#6 Re: HP 14-ca3003na - identyfikacja elementów


by matic 27 May 2024, 10:58
Certainly not.

Re: HP 14-ca3003na - identyfikacja elementów


by Google Adsense [BOT] 27 May 2024, 10:58
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.