• HP Envy 15-FE (LA-M794P) - Component Identification

It is currently 14 December 2024, 02:58

 [SOLVED] HP Envy 15-FE (LA-M794P) - Component Identification

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP Envy 15-FE (LA-M794P) - Component Identification

by KenM0560 • 1 November 2024, 13:24
Hello

I have a HP Envy 15-FE board number LA-M794P that is not powering on or charging. With a USB-C ammeter i can see that only 5v is negotiated with the PD controller, when looking at the board with a thermal camera the below component is reaching around 90 degrees celsius, i am unable to locate the PD controller, the symptoms are the same with both USB-C ports

can anybody ID this chip with markings fME0A?
Image
Image

Re: HP Envy 15-FE (LA-M794P) - Component Identification

by Google Adsense [BOT] • 1 November 2024, 13:24

#2 Re: HP Envy 15-FE (LA-M794P) - Component Identification  [SOLVED] 

by Vogelek23 • 1 November 2024, 18:06
Marking fMxxx refers to SY8032IABC (Silergy).

#3 Re: HP Envy 15-FE (LA-M794P) - Component Identification

by KenM0560 • 2 November 2024, 09:18
Vogelek23 wrote:Marking fMxxx refers to SY8032IABC (Silergy).


Excellent thank you for your help.

Re: HP Envy 15-FE (LA-M794P) - Component Identification

by Google Adsense [BOT] • 2 November 2024, 09:18
Similar Topics
HP Envy x360 15-fe0220nw mb LA-M794P rev 1.0 identyfikacja układu
  Active speaker SOT-23 component identification  [SOLVED]
  Toyota Yaris 1.0 GS 2001 Key fob component identification  [SOLVED]
HP Pavilion 15-cx gaming laptop - corroded resistor identification
HP Envy x2 15-c000na nie zawsze sie uruchamia
HP Envy x360 15-aq050nw po zalaniu brak 3.3V

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.