• HP LJ 1606 źle drukuje w duplexie

It is currently 14 December 2024, 04:44

 [SOLVED] HP LJ 1606 źle drukuje w duplexie

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP LJ 1606 źle drukuje w duplexie

by next44 • 9 October 2024, 21:08
Witam wszystkich, mam taki problem z drukarką HP 1606, przy wydrukach
dwustronnych druga strona ( ta która przechodzi przez duplex) jest
niedodrukowana z jednej strony. Jeśli drukuję jedną stronę ale przy
wydruku
duplex to ta strona jest niedodrukowana bo też przechodzi przez
duplex. Przy wydrukach jednostronnych jest ok. Załączam próbny wydruk
dwustronny. Drukarka ma mały przebieg: 13656 stron. Sprawdzałem inny
toner ale jest to samo. Jak zastosuję ręczny dupleks też słabo drukuje ale jak odczekam chwilę i kartka wystygnie to wydruk jest ok. Ma może ktoś pomysł co to może być?
Image
Image

Re: HP LJ 1606 źle drukuje w duplexie

by Google Adsense [BOT] • 9 October 2024, 21:08

#2 Re: HP LJ 1606 źle drukuje w duplexie  [SOLVED] 

by matic • 14 October 2024, 10:14
Hello!

Try to clean or better replace the transfer roller.

#3 Re: HP LJ 1606 źle drukuje w duplexie

by next44 • 2 November 2024, 13:05
Thank you Matic, I took out the transfer roller and put it back in and so far the printer prints ok in duplex. You'll see it with more prints. Something must have come loose because when I touched it, it popped out of the white clasp.

Re: HP LJ 1606 źle drukuje w duplexie

by Google Adsense [BOT] • 2 November 2024, 13:05
Similar Topics
  HP LJ PRO MFP M521DN CZARNE WYDRUKI
  Dziwne napięcie na cewce 0.72V na płycie HP DAG3BEMBCD0 REV D HP OMEN 17-AN106NW  [SOLVED]
  HP Probook 4540S can't start  [SOLVED]
[SCHEMATIC REQUEST] HP 17N-8L-TGL
Matryca HP 830 G8
[EC/KBC DUMP REQUEST] HP Z240 Atayal FXN1

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.