• HP OMEN - G3EA - uszkodzony MP2949

It is currently 4 April 2025, 23:56

HP OMEN - G3EA - uszkodzony MP2949

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP OMEN - G3EA - uszkodzony MP2949

by inventco • 15 March 2025, 09:29
Witam
Jak w temacie
HP OMEN DA0G3EMBCD0 REV D
PCH SRJAU
CPU SRH84
GPU N18E-G0-A1

10 ohm na linii 3V = zwarcie
okazało się, że uszkodzony jest układ : mp2949
tyle, że on wymaga programowania. Przynajmniej pamietam, że w jakichś lenovo się programuje ten kontroler.
Pytanie czy po wymianie tego układu na nowy zadziała czy nie ?
lub pytanie drugie czy ma ktoś może zgrany ten układ.

Pozdrawiam
Marek

Re: HP OMEN - G3EA - uszkodzony MP2949

by Google Adsense [BOT] • 15 March 2025, 09:29

#2 Re: HP OMEN - G3EA - uszkodzony MP2949

by matic • 15 March 2025, 13:46
inventco wrote:Pytanie czy po wymianie tego układu na nowy zadziała czy nie ?
Hello!
As you answered yourself, this chip requires programming, so there is no way it will work without programming.

inventco wrote:lub pytanie drugie czy ma ktoś może zgrany ten układ.
Open a new topic in "ZAPYTANIA O DOKUMENTACJE/BIOS" department according to the rules and ask for a dump of this chip. Don't forget to specify the major ICs markings according to the rules.

I managed to read a dump from this chip, but on a different board: ***Click***.

Re: HP OMEN - G3EA - uszkodzony MP2949

by Google Adsense [BOT] • 15 March 2025, 13:46
Similar Topics
  HP OMEN 15-EK0026NW - identyfikacja elementu  [SOLVED]
  Dziwne napięcie na cewce 0.72V na płycie HP DAG3BEMBCD0 REV D HP OMEN 17-AN106NW  [SOLVED]
  HP OMEN 15-DC1018NW - DAG3DCMBCC0 - Identyfikacja Kondensatora  [SOLVED]
  HP OMEN 15-DC1018NW - DAG3DCMBCC0 - Identyfikacja Rezystora  [SOLVED]
  HP Omen DAG37DMBAD0 ReV: D - włącza się i wyłącza
Schemat HP OMEN 15-dc Quanta G3DD DAG3DDMB8C0

Who is online

Users browsing this forum: No registered users and 8 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.