• Identyfikacja elementu w iPad 2

It is currently 7 January 2025, 11:14

 [SOLVED] Identyfikacja elementu w iPad 2

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Identyfikacja elementu w iPad 2

by bax001 • 16 October 2014, 13:07
Witam,
Kupiłem uszkodzonego iPada 2 (brak podświetlenia). Wymieniłem filtr, ale porównując z innymi zdjęciami płyt głównych widdzę, że brakuje jednego elementu. Czy ktoś mógłby mi zidentyfikować ten element? Druga sprawa, to widzę, że jest pole lutowicze z jednej strony (na górze) a z drugiej ma wspólne z innym elementem. Czy tak to powinno być? Poniżej zdjęcie.
Dziękuję.

[url=https://www.elvikom.pl/obrazki/_f/f_0023764.jpg]Image[/url]

Re: Identyfikacja elementu w iPad 2

by Google Adsense [BOT] • 16 October 2014, 13:07

#2 Re: Identyfikacja elementu w iPad 2

by finbar • 16 October 2014, 16:32
Look this
[url=https://www.elvikom.pl/obrazki/_f/f_0023770.png]Image[/url]

[url=https://www.elvikom.pl/obrazki/_f/f_0023771.png]Image[/url]

#3 Re: Odp: Identyfikacja elementu w iPad 2

by bax001 • 16 October 2014, 19:05
Dziękuję bardzo. Kondensator zamówiony. I z tego co rozumiem, to mogę bezpośrednio do pola lutowniczego od diody przylutować.

#4 Re: Identyfikacja elementu w iPad 2  [SOLVED] 

by finbar • 16 October 2014, 19:17
Yes
[url=https://www.elvikom.pl/obrazki/_f/f_0023772.png]Image[/url]

see here
iPad 2 подсветка решение.zip




You have to be logged in to view the files attached to this post.

Re: Identyfikacja elementu w iPad 2  [SOLVED]

by Google Adsense [BOT] • 16 October 2014, 19:17
Similar Topics
Identyfikacja elementu
  Identyfikacja elementu - prośba  [SOLVED]
  Macbook A1502 - identyfikacja elementu  [SOLVED]
  Poly Studio - Identyfikacja elementu  [SOLVED]
Asus X421JA - identyfikacja elementu
  Chińska kamera. Identyfikacja elementu.  [SOLVED]

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.