• Inel NUC 8i7BEH Martwy

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Inel NUC 8i7BEH Martwy


by mmike 12 July 2023, 12:24
Witam

Pacjent jak w temacie, nie znalazłem żadnego zwarcia, jednakże nie wiele odnalazłem bez schematu.
Brak napięcia na włączniku, 19V poprawnie wchodzi na płytę.

Czy ktoś posiada jakąś dokumentację ewentualnie zna lepiej płytę?

Z góry dziękuje za pomoc. Poniżej zamieszczam fotografie płyty.

Image
Image

Re: Inel NUC 8i7BEH Martwy


by Google Adsense [BOT] 12 July 2023, 12:24

#2 Re: Inel NUC 8i7BEH Martwy


by matic 12 July 2023, 13:07
Hello!

Measure the voltage to ground on any pin of marked resistor:
Image

#3 Re: Inel NUC 8i7BEH Martwy


by mmike 12 July 2023, 13:26
19V

#4 Re: Inel NUC 8i7BEH Martwy


by matic 12 July 2023, 15:11
Measure the voltages to ground on coils "A" and "B":
Image

#5 Re: Inel NUC 8i7BEH Martwy


by mmike 13 July 2023, 07:39
A - 0V / 2kOhm
B- 0V / 2kOhm

#6 Re: Inel NUC 8i7BEH Martwy


by matic 13 July 2023, 08:46
Measure the voltages to ground on pins 1, 5, 9, 11, 12, 15, 17 of chips "a" and "b":
Image

#7 Re: Inel NUC 8i7BEH Martwy


by mmike 14 July 2023, 08:28
A(BACBQI)
1 - 0,30V
5 - 19V
9 - 0V
11 - 0V
12 - 0,28V
15 - 0V
17 - 0,13V

B(BDJBRT)

1 - 0,30V
5 - 19V
9 - 0V
11 - 0V
12 - 0V
15 - 0V
17 - 0V

#8 Re: Inel NUC 8i7BEH Martwy


by matic 14 July 2023, 14:24
Measure the resistances to ground on pins 15, 17 of chips "a" and "b".

#9 Re: Inel NUC 8i7BEH Martwy


by mmike 17 July 2023, 08:26
A
15 - 6.8kOhm
17 - 7.4kOhm
B
15 - 4kOhm
17 - 7,1kOhm

#10 Re: Inel NUC 8i7BEH Martwy


by matic 17 July 2023, 09:39
Can you follow the copper trace connected to pin 11 of chips "a" and "b"?
If so, please post a clear picture of the chips "a" and "b" with a nearby surroundings and mark to which component(s) pin 11 of each chip is connected to.

#11 Re: Inel NUC 8i7BEH Martwy


by mmike 17 July 2023, 12:00
Pin 11 nie łączy się z niczym obok chipów "a" oraz "b".
Na mikroskopie również barak możliwości śledzenia ścieżki.

#12 Re: Inel NUC 8i7BEH Martwy


by matic 18 July 2023, 19:11
Please, post a clear pictures of chips "a" and "b" with a nearby surroundings.

#13 Re: Inel NUC 8i7BEH Martwy


by mmike 20 July 2023, 12:20
Image
Image
Image

Taka jakość wystarczy?

#14 Re: Inel NUC 8i7BEH Martwy


by mmike 24 July 2023, 09:11
Masz jeszcze jakieś pomysły?

#15 Re: Inel NUC 8i7BEH Martwy


by matic 27 July 2023, 10:27
Please, post a clear picture with visible markings on the marked chip.
Image

#16 Re: Inel NUC 8i7BEH Martwy


by mmike 27 July 2023, 10:35
Image

#17 Re: Inel NUC 8i7BEH Martwy


by matic 27 July 2023, 11:37
Measure the voltages to ground on pins 1, 3, 5, 6, 8, 9, 11 of this chip.
Pin count:
Image

#18 Re: Inel NUC 8i7BEH Martwy


by mmike 27 July 2023, 11:56
1 - 0V
3 - 0V
5 - 0V
6 - 3.3V
8 - 3.3V
9 - 3.6V
11 - 4.1V

#19 Re: Inel NUC 8i7BEH Martwy


by matic 27 July 2023, 12:31
mmike wrote:1 - 0V
Is this measurement correct?

#20 Re: Inel NUC 8i7BEH Martwy


by mmike 27 July 2023, 12:45
Błąd

1 - 19V

Re: Inel NUC 8i7BEH Martwy


by Google Adsense [BOT] 27 July 2023, 12:45
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.