• Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

It is currently 14 December 2024, 03:02

Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

by Tadmen • 29 July 2024, 16:09
Laptop jak w temacie, po włączeniu rośnie pobór prądu liniowo do ok 1,8 A i tak pozostaje .
Nie mam karty diagnostycznej na slot M2 więc nie wiem w jakim momencie procedury POST się zatrzymuje
Bios zmieniony, dzięki pomocy kolegi z forum który udostępnił wsad .
Posiłkuję się schematem z płyty MS-16P61 w/g którego brakuje mi napięcia VCCGT na cewce PL3
Rezystancja i napięcia na poszczególnych cewkach :
PL3 - 3 Om 0V
PL4 , PL5 , PL6 , PL7 , - 1,4 Om - +097 V
PL8 , PL9 - 0,9 Om - +07 V
PL10 - 24 Om - +1 V
PL13 - 18 Om - +1 V
PL14 - 12 Om - +1,24V
PL15 - 530 Om - +1,8V
PL16 - 3KOm - +5V
PL18 - 23 Om - +1,1 V
PL19 - 3,8KOm - +3,3 V
Będę wdzięczny za jakąś podpowiedż .

Re: Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

by Google Adsense [BOT] • 29 July 2024, 16:09

#2 Re: Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

by matic • 30 July 2024, 08:08
Tadmen wrote:PL14 - 12 Om
Hello!
Is this measurement correct?
Please, remeasure this resistance with and without RAM memory connected to the board.

#3 Re: Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

by Tadmen • 30 July 2024, 09:40
Potwierdzam , na PL14 bez pamięci jest 12 Om , natomiast przy włożonej pamięci jest 10,9 Om .
Jakoś mnie to nie zastanawiało ponieważ napięcie na tej cewce wynosi 1,24 V, a więc zbliżone do napięcia zasilania DDR4 .

#4 Re: Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

by matic • 30 July 2024, 13:09
So this resistance is definitely way too low.
Remove the coil PL14 from the board and check on which side of the coil you have a low resistance to ground. If the low resistance is present on the system side, I think it's most likely caused by a damaged CPU.
In such a case, remove the CPU from the board and remeasure the resistance to ground on coil PL14.

Re: Laptop MSI model MS-16p8, płyta MS-16P81 VER:1.0 , brak napięcia na PL3

by Google Adsense [BOT] • 30 July 2024, 13:09
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).
Similar Topics
[BIOS DUMP] BIOS MSI GL63 8RCS MS-16P8 PCB MS-16P81 VER:1.0
[BIOS DUMP REQUEST] Szukam wsadu bios, laptop MSI model MS-16p8
MSI gf75 MS-17F11 ver: 1.0 brak reakcji na włącznik
MSI MS-14C1 , płyta MS-14C41 Pomysł na obejście sygnału PWR_SW#
  MSI GV72 MS-16j91 VER: 1.0 brak reakcji, brak SUS_ON  [SOLVED]
[BIOS DUMP] MSI GF63 MS-16R41 VER:1.0 DISCREET BIOS + KBC

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.