plenrusldeituk
  • Lenovo 320-15IKB - nie włącza się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Lenovo 320-15IKB - nie włącza się


by krzysztof000 11 July 2024, 17:09
Witam,

Laptop Lenovo 320-15IKB, nie włącza się.
Model płyty głównej NM-B452.
Zauważyłem, że ktoś kombinował na płycie bo brakuje jednego mosfeta na PQ312 czyli AON7408L_DFN8-5

Załączam zdjęcie:

Image

Czy ktoś może pomóc i napisać jak naprawić te pady (pocynować) bo wszystko widzę na polu jest zlane ze sobą? Jak to doprowadzić do porządku?

Re: Lenovo 320-15IKB - nie włącza się


by Google Adsense [BOT] 11 July 2024, 17:09

#2 Re: Lenovo 320-15IKB - nie włącza się


by matic 16 July 2024, 16:18
krzysztof000 wrote:Czy ktoś może pomóc i napisać jak naprawić te pady (pocynować) bo wszystko widzę na polu jest zlane ze sobą?
Hello!
There is nothing wrong with the pads on the board, only a small piece of solder mask is removed. You can leave it as it is, so you just need to solder the transistor PQ312 as indicated in the following picture.
Image
The pins 1, 2, 3 must be connected together and pins 5, 6, 7, 8 as well.

Also measure the resistance to ground on any pin of resistor PR301.

Re: Lenovo 320-15IKB - nie włącza się


by Google Adsense [BOT] 16 July 2024, 16:18
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 4 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.