• Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

It is currently 14 December 2024, 04:42

Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

Re: Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Google Adsense [BOT] • 15 March 2024, 17:38

#22 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 15 March 2024, 20:03
Zemog wrote:OKAY. At this moment and after changing, KBC, the damaged and erroneous chip, the board has the following voltages, let's see if someone can help me again.
+3VL ... 3,18V
+5VLP ... 4,77V
+5VALW ... 5V
+3VALW, +1,8VAWL, ... 0V

EC_ON:3V# ... 3V

In KBC:
Pin 79 (APU3VALW_EN) ... 2,70V
Pin 86 (PBTN_OUT#) ... 0V
Pin 93 EC_RSMRST#R ... 0V
Pin 110 (ON/OFF_R) ... 3.1V and when you press the power button the value drops to 0V


I have changed KBC again and the values that have changed with respect to this previous measurement are:

+3VALW ... 0,93V
EC_ON3V# ... 0V
KBC pin 79 (APU3VALW_EN) ... 0V
The rest of the measurements are the same and EC_RSMRST# continues at 0V

#24 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 16 March 2024, 12:44
I have reprogrammed BIOS and dodo is still the same.
Bios is powered with +1.8VALW and while this is at 0V the BIOS will not work, right? All UC3 pins are at 0V

#26 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 19 March 2024, 11:03
Machine wrote:Mida los voltajes en los pines 4, 5, 16, 18, 19, 27 de PU1901.


Pin 4 ... 0,93V
Pin 5 ... 0V
Pin 16 ... 2,94V
Pin 18 ... 0V
Pin 19 ... 5,08V
Pin 27 ... 3,65V

#28 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 20 March 2024, 12:55
Machine wrote:Mida el voltaje y la resistencia a tierra del PL1902.

8K 0V

Machine wrote:Mida el voltaje y la resistencia a tierra en todas las bobinas.

PL1901 ... 40 Ohm 0v
PL1903 ... 60K 0V
PL5901 ... 5 Ohm 0V
PL5902 ... 5 Ohm 0V
PL5903 ... 3,5 Ohm 0V
PL 401 ... 13K 0,94V
PL 402 ... 250k 5,08V

#30 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 21 March 2024, 11:54
Pin 1 ... 3V
Pin 2 ... 20V
Pin 7 ... 0V
Pin 8 ... 19,84V
Pin 9 ... 0V

#31 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 22 March 2024, 13:13
In PU401 EC_ON_3V (pin 9) must be present for the +3VALW_P output to be activated, is that correct?
EC_ON_3V is currently at 0V and instead at +3VALW_P I have 0.90V, why?

#33 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 25 March 2024, 12:33
Pin 13 (+3VLP) ... 3,18V

#35 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 25 March 2024, 20:00
I can try to re-solder the original or previous KBC to see if the voltages are restored to the previous ones, and at the same time I will order new KBCs from other places, in case this batch has been defective.
The 2 KBC that I have placed correspond to the same order

#37 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 4 April 2024, 12:57
Zemog wrote:OKAY. At this moment and after changing, KBC, the damaged and erroneous chip, the board has the following voltages, let's see if someone can help me again.
+3VL ... 3,18V
+5VLP ... 4,77V
+5VALW ... 5V
+3VALW, +1,8VAWL, ... 0V

EC_ON:3V# ... 3V

In KBC:
Pin 79 (APU3VALW_EN) ... 2,70V
Pin 86 (PBTN_OUT#) ... 0V
Pin 93 EC_RSMRST#R ... 0V
Pin 110 (ON/OFF_R) ... 3.1V and when you press the power button the value drops to 0V


The chip nomenclature is the same

After changing to the previous chip, the values are the same as before.

I'm going to solder another new KBC from another seller that I received and see if it's a batch error.

#38 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 5 April 2024, 19:34
I have re-soldered a new KBC from another seller and they have changed some voltage but they are still bad
Now the measurements are these:
3VL ... 3.18V
+5VLP ... 4.85V
+5VALW ... 5,08V
+3VALW... 1,35V
+1.8VAWL, ... 0,1V

EC_ON:3V# ... 3,15V

In KBC:
Pin 79 (APU3VALW_EN) ... 3,13V
Pin 86 (PBTN_OUT#) ... 2,34v
Pin 93 EC_RSMRST#R ... 0V
Pin 110 (ON/OFF_R) ... 3V and when you press the power button the value drops to 0V

In this case, the processor heats up

#40 Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Zemog • 6 April 2024, 10:35
Measure the resistance to ground of PL1902.

8,55K

Machine wrote:Open PJ1904 and measure the voltage on PL1902.

0V

Machine wrote:Measure the voltages on pins 16, 27 of PU1901

Pin 16... When the power is connected it gives a peak of 2V and immediately drops to 0V
Pin 27... 3,65V

Re: Lenovo Ideapad 3 15ADA05 / NM-C821 / It does not turn on

by Google Adsense [BOT] • 6 April 2024, 10:35
Similar Topics
  LENOVO IDEAPAD 3 15ADA05 NM-C821 ODŁĄCZENIE WBUDOWANYCH PAMIĘCI  [SOLVED]
  Lenovo IdeaPad 3 15ADA05 NM-C821 odłączenie wbudowanych pamięci  [SOLVED]
  Lenovo 3 15ADA05 mb NM-C821 rev.1.0 prośba o pomoc w wyłączniu wudowanego ramu.  [SOLVED]
Lenovo IdeaPad 3 15ADA05 Laptop - Type 81W1 - Nie Podświetla Matrycy po Wymianie
Lenovo 15ADA05 - brak podświetlenia
Lenovo Ideapad 920 - 13IKB NM-B291 - Martwy

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.