• Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 30 January 2024, 13:55
Cześć.
Oznaczenia z płyty:GY55M, N, T, Q, R, S, W, V, NM-D281 REV: 1.0. Laptop podczas pracy został zrzucony na podłogę, zbita matryca, przestał się włączać. Pobór prądu po podaniu napięcia wynosi 0,15A, brak reakcji na włącznik. Bios przeprogramowałem 2 wsadami, bez zmian, upaleń na płycie nie ma, nic się nie grzeje. Poniżej podaję napięcia i rezystancję na cewkach i proszę o dalsze wskazówki:
PL2002 - 5,14V; 13,5kΩ
PL2001 - 3,4V; 5,7Ω
PL2701 - 0V; 88Ω
PL5105 - 0V; 0Ω
PL7701 - 5,14V; 14kΩ
PL5101 - 0,01V; 0,7Ω
PL5102 - 0,01V; 0,7Ω
PL5103 - 0,01V; 0,7Ω
PL5104 - 0,01V; 0,7Ω
PL2301 - 0V; 12Ω
PL8202 - 0V; 66Ω
PL8201 - 0V; 66Ω
PL7504 - 0V; 0,2Ω
PL7503 - 0V; 0,2Ω
PL7502 - 0V; 0,2Ω
PL7501 - 0V; 0,2Ω
PL1401 - 0V; 0Ω
PL101 - 0,23V; 4,5MΩ
PL1301 - 0V; 0Ω.

Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by Google Adsense [BOT] 30 January 2024, 13:55

#2 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 31 January 2024, 15:51
arjuredi wrote:PL5105 - 0V;
PL1401 - 0V;
PL1301 - 0V;
Hello!
Are you sure there are dead shorts to ground on those three coils?
Did you measure the resistances with all power sources disconnected from the board?

#3 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 1 February 2024, 11:08
Yes, exactly. I changed the batteries in the meter and it comes out the same. After connecting the probes, I have a resistance of 0.001Ω and when measuring on the coils, I also have 0.001Ω. I called the customer yesterday and he said that before he brought the laptop, they connected 2 displays, but he doesn't remember which ones.

#4 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 1 February 2024, 11:51
Remove the coil PL1301 from the board and check on which side of this coil is a short circuit to ground. If the short circuit is present on the system side (power rail "+1.8VALW"), perform a short circuit test described here. For a short circuit test limit the voltage to 1.8V.

#5 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 20 February 2024, 13:41
After the short-circuit test, UC1 is finally heated up.

#6 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 20 February 2024, 14:32
So the APU processor is unfortunately damaged and needs to be replaced.
First remove the APU from the board and remeasure the resistances to ground on coils PL1301, PL1401, PL5105.

#7 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 21 February 2024, 14:32
Do you know the factory markings on this chip, because there is nothing stamped on the core and I don't know exactly what to look for?
Image

#8 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 22 February 2024, 08:51
The core of these chips is originally unmarked. The markings are printed on the metal edge of the chip.
Image
The exact marking of the chip is 100-000000100 (It's an AMD Ryzen R5-4600H).

#9 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 27 May 2024, 15:31
PL1301 - 34kΩ
PL1401 - 1,88MΩ
PL5105 - 5MΩ

#10 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 27 May 2024, 18:21
The resistances seems fine. Solder a functional APU to the board.

#11 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 10 June 2024, 12:40
Markings 100-000000100 means Ryzen 5 R5-4600H?

#12 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 10 June 2024, 14:45
Yes, exactly.

#13 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 4 July 2024, 14:06
I have solder a new APU and now I have these resistance:
PL1301 - 4,28 kΩ
PL1401 - 30 Ω
PL5105 - 6,6 Ω
I have no reaction on power button.

#14 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 8 July 2024, 11:27
Remeasure the resistances to ground on all coils.

#15 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by arjuredi 11 July 2024, 16:50
PL2002 - 5,13V; 13,7kΩ
PL2001 - 3,4V; 3,7kΩ
PL2701 - 0V; 146Ω
PL5105 - 0V; 5,5Ω
PL7701 - 5,13V; 14kΩ
PL5101 - 0V; 2,4Ω
PL5102 - 0V; 2,4Ω
PL5103 - 0V; 2,4Ω
PL5104 - 0V; 2,4Ω
PL2301 - 0V; 10Ω
PL8202 - 0V; 60Ω
PL8201 - 0V; 60Ω
PL7504 - 0V; 0,5Ω
PL7503 - 0V; 0,5Ω
PL7502 - 0V; 0,5Ω
PL7501 - 0V; 0,5Ω
PL1401 - 0V; 26Ω
PL101 - 0,23V; 4,5MΩ
PL1301 - 1,8V; 4,2kΩ.

#16 Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by matic 15 July 2024, 14:22
- Measure the voltages to ground on both pins of quartz YC1. It's best to measure it with an oscilloscope. If you don't have it, measure with a multimeter.
- Measure the voltage to ground on pin 90 of KBC chip.

Re: Lenovo Legion 5 15ARH05H - zbita matryca, brak reakcji na włącznik


by Google Adsense [BOT] 15 July 2024, 14:22
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.