• Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG


by DangeR 4 March 2024, 10:53
Hi,
Can anyone help me with MEC1653 JTAG please? I already read here on forum:

1.TMS
2.TDI
3.TDO
4.TCK
5.GND
6.RST

"To enable JTAG Port, you need to remove the 10kΩ resistor R7010 from the board, and insert a 100kΩ resistor in place of R7009, and you should also pull up to n.6 using a 10kΩ resistor."

But can anyone help me to identify the R7010 and R7009 or to mark them in attached image?
Thank you!

Image

Re: Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG


by Google Adsense [BOT] 4 March 2024, 10:53

#2 Re: Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG


by Vogelek23 4 March 2024, 11:49
Check if the resistor marked yellow is 10kΩ and its pin marked with red arrow is connected to ground. If YES, remove it and solder a 100kΩ resistor to the position marked green.
Image

#3 Re: Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG


by DangeR 4 March 2024, 16:22
Thank you for answer. I did exactly like in your picture and also pulled up 6.RST using a 10kΩ resistor but No response from MEC. I'm using SUCCESSOR.

#4 Re: Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG


by matic 5 March 2024, 20:53
Make sure the resistors R7701, R7702, R7703, R7704, R7705, R7706, R7707, R7708 are soldered to the board.

Re: Lenovo ThinkPad P1 Gen 1 20ME LPM-1 MB 17870-1 MEC1653 JTAG


by Google Adsense [BOT] 5 March 2024, 20:53
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.