• LG XA16 - Wymiana lesera, niby czyta ale jednak nie.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by bpjl 12 March 2021, 22:07
Cześć.

Dostałem na stół mikro wieżę LG XA16 a problemem nie czytania żadnych płyt. Postawiłem na uszkodzony laser i nabyłem nowy (model SOH-AAV). Po wymianie wygląda to tak:
- większości płyt wieża dalej nie czyta
- niektóre zaczęła odtwarzać bez problemu (naprawdę nieliczne)
- są też takie przy których niby odczyta płytę ale nic nie odtwarza tylko przeskakuje na kolejne utwory.

Mam 2 pytania:
- czy szukać innej wady poza laserem a jeśli tak to gdzie?
- czy takie zachowanie nowego lasera kwalifikuje go do zwrotu/wymiany?

Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by Google Adsense [BOT] 12 March 2021, 22:07

#2 Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by matic 13 March 2021, 11:51
Hello!

It seems to me, the laser was replaced with a new cheap one.
There are a lot of new lasers available in the market at a very low price (less than 40PLN), but all of these are low quality counterfeits in my opinion. The new genuine lasers usually costs around 140-200PLN, so it is clear that the counterfeits for 40PLN or even less can't work as it should.

Sometimes a low-cost fakes even work, but it mostly depends on luck.
I think, you should replace the laser again with a better one.

#3 Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by bpjl 13 March 2021, 14:03
Thank you for your answer.

Could you please advise me some good quality replacement for this SOH-AAV? On another forum I found information that they can be: SOH-AAF, SOH-AAU or even KSS213. However, they all come at similar prices. So are they the same poor quality as mine?

#4 Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by matic 13 March 2021, 22:22
I haven't tried to replace this laser with any of the listed ones, so I don't know, if these replacements really works.
However, I don't recommend the replacement KSS-213, because this is one of the most widely used lasers for which there are the most low-quality counterfeits in my opinion.

I don't know, how to identify the low-quality counterfeits, but I think the most reliable indicator is a slightly higher price, which is not lower than for example 70 PLN.

For example the laser SOH-AAV is available on Ebay for a bit more "trustworthy" price (unfortunately from China).
Ebay item number: 181117744267 or 273906447942

#5 Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by bpjl 13 March 2021, 23:00
matic wrote:I think the most reliable indicator is a slightly higher price, which is not lower than for example 70 PLN.

For example the laser SOH-AAV is available on Ebay for a bit more "trustworthy" price (unfortunately from China).
Ebay item number: 181117744267 or 273906447942


Unfortunately, in Poland, the prices in different stores are very similar to each other, so I suspect that everything comes from one source - China. Therefore, I do not have much to choose from, depending on the price.

You provide info about all mechanisms. I bought the head itself, which is also 100% from China, and it cost me PLN 50

Image

And it ended this way. That is why I am thinking of returning this thing and acquiring another. Maybe I can hit a good one at some point.

#6 Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by bpjl 17 March 2021, 17:04
I replaced the laser I had bought with a new one, but the symptoms were the same. I wanted to replace it again, this time the entire head together with the mechanics, but the owner of this LG said that there is no point in wasting time and money on repairing equipment of this class. He bought something new and left this XA16 for parts.

In fact, everything except the CD works (radio, USB and BT) so I will find someone who will need it as it is.

Thank you for your willingness to help with the repair.

Re: LG XA16 - Wymiana lesera, niby czyta ale jednak nie.


by Google Adsense [BOT] 17 March 2021, 17:04

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.