• MSI GF63 Thin 11UC, ms-16r61 martwy

It is currently 14 December 2024, 03:50

MSI GF63 Thin 11UC, ms-16r61 martwy

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 MSI GF63 Thin 11UC, ms-16r61 martwy

by poster • 10 October 2024, 10:47
Płyta: ms-16r61
CPU: SRKT1
GPU: GN20-P0-A1
PCH: SRKMA
KBC: ENE KB9548GF2

Laptop trafił do mnie martwy, ze zwarciem na +1.8B (PL13).
Wymieniłem most PCH, wyczyściłem ME w biosie. Rezystancja PL13 wzrosła do 1.7 kOhm.
Image
Po podłączeniu zasilacza płyta nie reaguje na przycisk, jest martwa. Pobór prądu to 0.08A. Jedyne co się lekko nagrzewa na płycie to PCH, do 26°C.

Na kości SPI 3.3V obecne. Na przycisku power 3.3V obecne.

Pomiary:
PL9 = 3.3V
PL8 = 5V
PL13 = 1.8V
PL16= 1.8V
PL18 = 0.29V (bez baterii, z baterią 11.5V, laptop poprawnie ładuje baterię co sygnalizuje diodą)
PL2 = 1.8V
Choke2 = 0.99V
Pozostałe cewki: brak zasilania

Rezystancje:
PL9 = 2.2kΩ
PL8 = 2.5kΩ
PL13 = 1.7kΩ
PL16 = 693Ω
PL18 = 45kΩ
PL2 = 67Ω (1.8V CPU)
PL3,PL4,PL5,PL6 = 14Ω (Zasilanie CPU)
PL10,PL11 = 0.4Ω (zasilanie GPU)
Choke1 = 82Ω
Choke2 = 957Ω
PL14 = 38Ω
PL20 = 1.4kΩ
Pierwotnie myślałem, że sprzedano mi wadliwy PCH, zamówiłem więc drugą sztukę od innego dostawcy. Po wlutowaniu zachowanie płyty jest identyczne.

Proszę o pomoc w znalezieniu usterki. Nie znalazłem nigdzie schematu ani BV do tej płyty.

Re: MSI GF63 Thin 11UC, ms-16r61 martwy

by Google Adsense [BOT] • 10 October 2024, 10:47
Similar Topics
MSI GF63 Thin 11UC płyta ms-16r61 brak reakcji
MSI GF63 MS-16R41 ver 1.0 martwy po zwarciu w gnieździe zasilania
  MSI Katana GF76-11UC, MB: MS-15821 - brak obrazu
MSI Katana GF76 11UC-468XPL, MB: MS-15821 rev. 2.0, taktowanie GPU 210MHz
Schemat MSI GF75 Thin 8RC MS-17F1 MS-17F11
Schemat MSI GF65 Thin 10UE MS-16W2 MS-16W21

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.