Hello everyone!
I have a Pioneer speaker model DM-40-W, with part number on the power supply 23PW03000126.
Initially it came with the SR5200 diode shorted, which has been replaced by SB5200.
After changing the rectifier diode, the power supply continues without generating voltage.
The 10N60 mosfet was checked and it is fine, but on its pins I only have voltage on Drain (pin 2) 330V.
On Gate and Source there is 0V.
There is a 6-pin component with AEsG1 silkscreen, which I cannot identify to look for the datasheet. On all its pins there is 0V, except on one of them there is 10.8V. The photo indicates the pin that has voltage
On the primary of the transformer, on the 2 pins at the ends I have 330V and on the 2 central pins 0V
Can anyone help me?
I have a Pioneer speaker model DM-40-W, with part number on the power supply 23PW03000126.
Initially it came with the SR5200 diode shorted, which has been replaced by SB5200.
After changing the rectifier diode, the power supply continues without generating voltage.
The 10N60 mosfet was checked and it is fine, but on its pins I only have voltage on Drain (pin 2) 330V.
On Gate and Source there is 0V.
There is a 6-pin component with AEsG1 silkscreen, which I cannot identify to look for the datasheet. On all its pins there is 0V, except on one of them there is 10.8V. The photo indicates the pin that has voltage
On the primary of the transformer, on the 2 pins at the ends I have 330V and on the 2 central pins 0V
Can anyone help me?