• Samsung ls24a300 LED, problem z uruchomieniem.

It is currently 9 January 2025, 17:34

Samsung ls24a300 LED, problem z uruchomieniem.

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Samsung ls24a300 LED, problem z uruchomieniem.

by oneeye • 22 August 2013, 11:02
Witam!

Zalany monitorek, uszkodzony panel dotykowy. Potrzebuję wartości dwóch rezystorów R13, R14, które wyparowały lub jakiekolwiek info jak wymusić pracę zasilaczy, bo jak mniemam bez panelu wszystkie napięcia nie ruszą. Prawdopodobnie też, te panele użyte zostały w wielu innych modelach. Może ktoś posiada rozbitka?

Image

Z góry dzięki!

Re: Samsung ls24a300 LED, problem z uruchomieniem.

by Google Adsense [BOT] • 22 August 2013, 11:02

#2 Re: Samsung ls24a300 LED, problem z uruchomieniem.

by amorphe • 22 August 2013, 14:51
Może coś z datasheet ASRG08 będzie pomocne - zalecana aplikacja str. 32
Code: Select allhttp://www.icpdf.com/PdfView.asp?id=8319359_81697

Można też prześledzić szynę I2C - czy nie są to rezystory szeregowe bądź "podciągające".

#3 Re: Samsung ls24a300 LED, problem z uruchomieniem.

by oneeye • 27 August 2013, 16:30
Udało się zdobyć panelik, monitorek śmiga, ale pociągnę temat. Kupiliśmy drugi uszkodzony na części podobny model - S24A300BZ (LS24a300), poprzednio S24A300H. Drugi monitorek wyświetla komunikaty, brak treści obrazu. Próbuję znaleźć do niego wsad. Z naszego egzemplarza nie podejdzie (różnica w modelach - HDMI -> DVI). Czy ktoś posiada wsad, ewentualnie potrafi wydobyć go z pliku z firmware update'era ze stronki producenta?

http://www.samsung.com/uk/support/model/LS24A300BZ/EN-downloads

Zamieszczam wsad z "naszego" S24A300H.



You have to be logged in to view the files attached to this post.

#4 Re: Samsung ls24a300 LED, problem z uruchomieniem.

by figofag • 27 August 2013, 20:28
Oneeye to widziałeś. Jest z DVI tylko kolega Pocinas zapomniał wsad dołączyć.
viewtopic.php?f=233&t=25999

#5 Re: Samsung ls24a300 LED, problem z uruchomieniem.

by Usunięty Użytkownik 402 • 17 September 2013, 00:29
Sprawdź, po rozpakowaniu z podanego przez ciebie linku wyciągnąłem to.



You have to be logged in to view the files attached to this post.

Re: Samsung ls24a300 LED, problem z uruchomieniem.

by Google Adsense [BOT] • 17 September 2013, 00:29
Similar Topics
  Samsung Led TV UE48JU6410U / stanby led in loop on/off, and won't turn on (Solved)  [SOLVED]
ASUS TUF FX516 (FX516PC) - problem z uruchomieniem
  Samsung UE43TU8005K enters protection after changing the LED strips  [SOLVED]
  Samsung R522 BA41-01062a problem z biosem  [SOLVED]
Lenovo Legion 5 17ACH6H NM-D562 rev. 2.0 - po zalaniu, problemy z uruchomieniem
Dell Latitude 5580 led blink 1 white 2 orange

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.