• HP Slate 7 - brak reakcji

It is currently 14 December 2024, 09:46

HP Slate 7 - brak reakcji

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 HP Slate 7 - brak reakcji

by franekx6 • 10 June 2016, 16:15
Witam,

Tablet HP Slate 7 2800

Po podłączeniu pobór prądu 93mA. Gdy wcisnę przycisk włącznika i przytrzymam jakieś 7s to prąd przysiada do 28mA, po puszczeniu wraca do 93mA.
Dostałem go z kompletnie rozładowaną baterią, baterię podładowałem jednak bez zmian. Bateria obecnie ma 4.2V
Powyższa sytuacja wygląda z podłączoną baterią, gdy odłączę baterie to pobór prądu oscyluje w okolicach 140mA, tutaj natomiast przy wduszeniu włącznika przez około 7s pobór prądu spada do 0mA.

Po podłączeniu do komputera tablet wykrywany jest jako Rockusb Device.

Re: HP Slate 7 - brak reakcji

by Google Adsense [BOT] • 10 June 2016, 16:15
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).
Similar Topics
HP Pavillon 15 brak reakcji na power.
HP 650 Płyta NEWTON_CR&HR_HPC MV_MB_V1 brak reakcji
  HP Pavilion 14-ec0850nd [556R8EA] - brak reakcji na włącznik  [SOLVED]
HP Elitebook 850 G3 6050A2892401-MB-A01 brak reakcji na włacznik
  HP ELITEBOOK 850 G3 6050A2822301-MB-A01 Brak reakcji na włącznik  [SOLVED]
  HP Pavilion 15-n Quanta U92 brak reakcji na włącznik. Prośba o identyfikację układu  [SOLVED]

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.