• Amplituner Daewoo DV-115 - nie włącza się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#21 Re: Amplituner Daewoo DV-115 - nie włącza się


by bpjl 28 September 2020, 14:18
matic wrote:Lift the pin 29 (or cut the copper trace to this pin) of chip IC904 and perform the following measurements.

Measure the voltage on capacitor C959 in the following cases:
a) Power button S907 released.
b) Power button S907 pressed.

a) Power button S907 released. = 4,5V
b) Power button S907 pressed. = 2,75V

Re: Re: Amplituner Daewoo DV-115 - nie włącza się


by Google Adsense [BOT] 28 September 2020, 14:18

#22 Re: Amplituner Daewoo DV-115 - nie włącza się


by matic 28 September 2020, 18:29
It seems the processor chip IC904 is damaged, or its firmware is corrupted.
This chip requires programming, but the dump is unfortunately unavailable.
I think it is only option to replace the entire front board with another one pulled from the same machine model, but it is very hard to find.

I think someone made a short circuit somewhere (most likely on the front panel board) and consequently burns the processor chip IC904 and fuse IC702.

#23 Re: Amplituner Daewoo DV-115 - nie włącza się


by bpjl 28 September 2020, 18:40
This is the worst-case scenario that could have happened. Nevertheless, thank you for your time and willingness to help.

Re: Amplituner Daewoo DV-115 - nie włącza się


by Google Adsense [BOT] 28 September 2020, 18:40
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.