• Asus Eeetop ET1602C (main EM16C-DHS REV 1.01G) no power on after press power button

It is currently 14 December 2024, 14:41

Asus Eeetop ET1602C (main EM16C-DHS REV 1.01G) no power on after press power button

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Asus Eeetop ET1602C (main EM16C-DHS REV 1.01G) no power on after press power button

by robgerr • 15 October 2021, 11:19
Good morning
This EEEtop- no power on after press power button.
Checked the main board, I have no voltage in the coils but I noticed if I press or heat the component in the picture, the voltages + 5V and + 12V are generated and the main board starts regularly. I tried to unsolder the component and resolder it but same defect. In some forums they say it is an Rt8205 but it is not because it has fewer pins this soldered. I ask for help to understand the name of the component because with the code printed above "DJ-AK" I can not find anything.
Image

Re: Asus Eeetop ET1602C (main EM16C-DHS REV 1.01G) no power on after press power button

by Google Adsense [BOT] • 15 October 2021, 11:19

#2 Re: Asus Eeetop ET1602C (main EM16C-DHS REV 1.01G)

by Sothoth • 15 October 2021, 11:24
DJ-AK is RT8202APQW

Re: Asus Eeetop ET1602C (main EM16C-DHS REV 1.01G)

by Google Adsense [BOT] • 15 October 2021, 11:24
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).
Similar Topics
  Macbook A1708 Main 820-00840A no power on
Asus A550cc motherboard X550cc rev:2.0 no power
ASUS Vivobook M7600R (M6500RC R2.0) - 19V Power Rail Not generated, AC-Detect
[BIOS DUMP REQUEST] ASUS ZenBook Flip UX463FL (UX334FL MAIN BOARD REV. 2.0)
Lenovo B450 power problem
Schemat Gigabyte B560M POWER

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.