• PS4 Pro - płyta NVA-001 - nie działa BD-ROM

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 PS4 Pro - płyta NVA-001 - nie działa BD-ROM


by kowalcook 14 January 2022, 20:23
Witam jak w temacie mam problem z konsolą PS4 pro - mianowicie nie działa BD-ROM, całkowity brak zasilania, nawet nie wciąga płyt.

Zakupiono drugi napęd z konsolowo, po podmianie nadal ten sam efekt, czyli to nie wina samego napędu.
Gniazda taśm wizualnie wyglądają na nieuszkodzone.

Sprawdziłem bezpieczniki zaznaczono na tym zdjęciu
Image

wymieniłem układ bd7764muv pokazany na tym zdjęciu
Image

nadal brak efektu


Czy ktoś miał podobny problem i czy potrafi naprowadzić mnie tam, gdzie jeszcze mogę szukać problemu ?

Konsola się normalnie włącza, bootuje system, dysk działa, kontrolery się parują, nie działa tylko sam BD-ROM.



Będę wdzięczny za pomoc.
Pozdrawiam.

Re: PS4 Pro - płyta NVA-001 - nie działa BD-ROM


by Google Adsense [BOT] 14 January 2022, 20:23

#2 Re: PS4 Pro - płyta NVA-001 - nie działa BD-ROM


by matic 14 January 2022, 20:36
Hello!

Have you checked the fuse F6001 (it is highlighted on the following picture)?
If it is good, measure the voltages to ground on all three fuses (F6001, F6201, F6202).

Image

#3 Re: PS4 Pro - płyta NVA-001 - nie działa BD-ROM


by kowalcook 18 January 2022, 16:29
Cześć matic, sprawdziłem F6001 i jest ok.
Na F6001 zasilanie do masy, jest 11,84V.
Na F6201, F6202 do masy jest 5,05V

Re: PS4 Pro - płyta NVA-001 - nie działa BD-ROM


by Google Adsense [BOT] 18 January 2022, 16:29
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.