• FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?


by doar2d 17 March 2022, 14:19
Hello
I have a FUJITSU ESPRIMO Q9000 i57QMx-vP computer and an integrated has exploded. Its callsign is UB6 and is on the back of the board. Could someone help me and tell me what type this integrated is?
Image

Re: FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?


by Google Adsense [BOT] 17 March 2022, 14:19

#2 Re: FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?


by Vogelek23 18 March 2022, 00:52
Can you upload a close-up photo of this component, and/or tracks and pads while UB6 is desoldered?

#3 Re: FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?


by xamledyD 18 March 2022, 14:13
Hello.
I'm 90% sure that UB6 should be populated with APW7080 chip. Datasheet below.



You have to be logged in to view the files attached to this post.

#4 Re: FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?


by doar2d 18 March 2022, 21:37
Thank you for help !

Re: FUJITSU ESPRIMO Q9000 - UB6 INTEGRATED CIRCUIT EXPLODED. What type is it ?


by Google Adsense [BOT] 18 March 2022, 21:37
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.