• Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by iT0mT0m 30 November 2022, 19:36
Witam,
Dostałem ponownie tą samą kartę do diagnozy co z tematu: identyfikacja-elementow-gtx-970-jetstream-t63008.html. Nie pokazuje obrazu w komputerze. Po wstępnym sprawdzeniu przepaliło bezpiecznik za portem HDMI. Mam takie rezystancje na cewkach:
L4 - 96,1Ω
L6 - 96,1Ω
L15 - 5,5Ω
L12 - 5,5Ω
L10 - 5,5Ω
L9 - 5,5Ω

Co mogę sprawdzić jeszcze, aby namierzyć usterkę?

//edit
Proszę o przeniesienie do działu Naprawa desktopów. Nie spojrzałem dokładnie gdzie dodaje temat.

Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by Google Adsense [BOT] 30 November 2022, 19:36

#2 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by matic 30 November 2022, 20:15
Hello!

Measure the resistance on two big ceramic capacitors near the DrMOS U15.

#3 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by iT0mT0m 30 November 2022, 20:36
matic wrote:Measure the resistance on two big ceramic capacitors near the DrMOS U15.

One side have 5,7Ω and the second side have 0,01Ω. Measure two ceramic capacitors.

#4 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by matic 30 November 2022, 20:47
iT0mT0m wrote:One side have 5,7Ω
Measure the resistance between the side with 5,7Ω and coil L9 (put one meter probe on the capacitor, the other on the coil).

#5 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by iT0mT0m 30 November 2022, 20:53
matic wrote:Measure the resistance between the side with 5,7Ω and coil L9 (put one meter probe on the capacitor, the other on the coil).

Only 0,02Ω

#6 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by matic 30 November 2022, 20:59
iT0mT0m wrote:
matic wrote:Measure the resistance between the side with 5,7Ω and coil L9 (put one meter probe on the capacitor, the other on the coil).
Only 0,02Ω
One of the DrMOS chips U15 or U16 is damaged.

Remove the coil L9 from the board and remeasure the resistances from the post #3.

#7 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by iT0mT0m 30 November 2022, 21:29
matic wrote:Remove the coil L9 from the board and remeasure the resistances from the post #3.


One side have 4,7Ω and the second side have 0,02Ω.

#8 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by matic 30 November 2022, 21:31
iT0mT0m wrote:
matic wrote:Remove the coil L9 from the board and remeasure the resistances from the post #3.
One side have 4,7Ω and the second side have 0,02Ω.
Also remove the coil L10 and remeasure the resistance.

#9 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by iT0mT0m 30 November 2022, 21:54
matic wrote:Also remove the coil L10 and remeasure the resistance.

One side have 6,62 kΩ and the second side have 0,01Ω.

#10 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze  [SOLVED]


by matic 30 November 2022, 21:58
iT0mT0m wrote:
matic wrote:Also remove the coil L10 and remeasure the resistance.
One side have 6,62 kΩ and the second side have 0,01Ω.
So the DrMOS chip U16 is damaged and needs to be replaced.

#11 Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by iT0mT0m 30 November 2022, 23:22
DrMOS replaced, coils and fuse are soldered. GPU is working, picture are back. Very thanks for help.

Re: Palit Geforce GTX970 JetStream - nie uruchamia się w komputerze


by Google Adsense [BOT] 30 November 2022, 23:22

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.