• B&R SPC900.TS77-05 Short circuit problem

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 B&R SPC900.TS77-05 Short circuit problem


by ismailakyoltr 8 January 2023, 07:56
There is no brand or model statement other than the case. I'm guessing it's just the B&R brand on the motherboard.

Brand: B&R
Model: SPC900.TS77
Mainboard: APCBB53 050005082-03

I did apply 5th pin 1v 1a, any part does not heat up. I am waiting for your help about the product.

Image
Image
Image
Image

Re: B&R SPC900.TS77-05 Short circuit problem


by Google Adsense [BOT] 8 January 2023, 07:56

#2 Re: B&R SPC900.TS77-05 Short circuit problem


by matic 8 January 2023, 11:23
ismailakyoltr wrote:I did apply 5th pin 1v 1a, any part does not heat up.
Hello!
Repeat the short circuit test on pin 16 of this chip. Limit the voltage to 3V. Start with a current limit 0.5A. If nothing heats up, rise up the current to 1A.
If still nothing heats up, measure the voltage on the end of test wires (at the point, where they are soldered to the board) during a short circuit test at 1A.

#3 Re: B&R SPC900.TS77-05 Short circuit problem


by Vogelek23 8 January 2023, 14:13
Please remove the marked part of the sticker to uncover the printed markings (partially visible on the left, begin with 133).
Image

#4 Re: B&R SPC900.TS77-05 Short circuit problem


by ismailakyoltr 10 January 2023, 12:38
I have installed up to 1.5a but there is no heating component on the front and back.
I can't think of anything. Any chance of working with low resistance?
Even if it's bios related. I think I can't find dump bios.
I'm considering removing the CPU based on the answers from you guys.

Image
Image
Image

matic wrote:1A'da kısa devre testi sırasında test kablolarının ucundaki (panoya lehimlendikleri noktada) voltajı ölçün.

I'm sorry I skipped this part. If it's important, I can repeat the process.

#5 Re: B&R SPC900.TS77-05 Short circuit problem


by matic 10 January 2023, 21:15
ismailakyoltr wrote:
matic wrote:1A'da kısa devre testi sırasında test kablolarının ucundaki (panoya lehimlendikleri noktada) voltajı ölçün.
I'm sorry I skipped this part. If it's important, I can repeat the process.
Yes, it's important. Please do it.

#6 Re: B&R SPC900.TS77-05 Short circuit problem


by ismailakyoltr 11 January 2023, 11:56
matic wrote:1A'da kısa devre testi sırasında test kablolarının ucundaki

I stripped the middle of the cable, there is 0.28v there, but there is nothing at the point where they are soldered to the board.
Image
Image

#7 Re: B&R SPC900.TS77-05 Short circuit problem


by matic 11 January 2023, 15:42
There is no short circuit at all.
The LDO3 output of the chip ISL62392C is not used on this board. The designer of the board disabled the LDO3 regulator with connecting the enable pin to ground and this way the LDO3 output is not active and can be connected to the ground as well.

Solder the ISL chip back to its place and measure the voltages to ground on pins 1, 4, 8, 11, 14, 17, 18, 21, 24, 27 of this chip.

#8 Re: B&R SPC900.TS77-05 Short circuit problem


by ismailakyoltr 12 January 2023, 13:16
The assembly is complete, the measurements are like this.
Image
Image
matic wrote:ISL çipini tekrar yerine lehimleyin ve bu çipin 1, 4, 8, 11, 14, 17, 18, 21, 24, 27 pinlerindeki toprağa giden gerilimleri ölçün.

1)28K 4)1.4M 8)22K 11)10K 14)200M+
17)9M 18)10M 21)200M+ 24)2ohm 27)35K

#9 Re: B&R SPC900.TS77-05 Short circuit problem 


by matic 12 January 2023, 13:25
ismailakyoltr wrote:1)28K 4)1.4M 8)22K 11)10K 14)200M+
17)9M 18)10M 21)200M+ 24)2ohm 27)35K
I asked about the voltage measurements, not resistances.

#10 Re: B&R SPC900.TS77-05 Short circuit problem


by ismailakyoltr 19 January 2023, 07:14
Thanks for your help. The product is currently on hold, I will take it back to the counter in the future.

Re: B&R SPC900.TS77-05 Short circuit problem


by Google Adsense [BOT] 19 January 2023, 07:14

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.