• HP Pavillon 15 brak reakcji na power.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 HP Pavillon 15 brak reakcji na power.


by dir 15 December 2023, 18:23
HP Pavillon 15 brak reakcji na power, Quanta R62 DAOR62MB6E0 REV E. Po podłączeniu zasilacza pobór prądu pulsujący 0,00A - 0,03A i brak reakcji na przycisk.
Powodem okazało się zwarcie na PR198, po wyeliminowaniu przez próbę zwarciową kondensatora EC17, zwarcie ustąpiło (przy okazji wymieniony BQ24738 bo nie wystawiał mi na n.4 ACPRES), ale dalej nie mam reakcji na przycisk.
Brak linii 3,3V i 5V pomimo tego ze sterowniki są zasilane i na n.6 PU9 i PU10 jest 3,3V i 5V.

Re: HP Pavillon 15 brak reakcji na power.


by Google Adsense [BOT] 15 December 2023, 18:23

#3 Re: HP Pavillon 15 brak reakcji na power.


by dir 16 December 2023, 10:43
PU9 12 pin - 5,3V
PU10 13 pin - 0V
Na n. 101, U13 też brak jakiegokolwiek napięcia, pomimo że układ jest zasilany.

PL11 - 3V, 0,74kΩ
PL22- 0V, 2,28kΩ
PL24 - 0V, 5,2kΩ
PL17 - 0V, 176Ω
PL37 - 0V, 1,1kΩ
PL29 - 0V, 0,54kΩ
PL23 - 0V, 26,5Ω
PL20 - 0V, 26,5Ω

bez procesora:
PL32 - 0V, 32,8kΩ
PL34 - 0V, 0,6kΩ
PL35 - 0V, 0,6kΩ
PL30- 0V, 36Ω
PL8 - 0V, 3,8kΩ

z założonym procesorem:
PL32 - 14,3Ω
PL34 - 3,2Ω
PL35 - 3,2Ω
PL30 - 12,8Ω
PL8 - 0,3kΩ

#4 Re: HP Pavillon 15 brak reakcji na power.


by Machine 16 December 2023, 11:29
Measurements taken after pressing the power on button.
Measure the voltages on pins 6, 16, 64, 73, 76, 95, 100, 101, 115, 124 of U13 (KBC).
Measure the voltages on pin 19, 90 of the KBC in the following cases:
to power OFF
with power on pressed
to power "ON".

#5 Re: HP Pavillon 15 brak reakcji na power.


by dir 16 December 2023, 13:33
układ U13:
6- 0V
16-0V
64-0V
73-0,13V
76-2,98V
95 -3,3V
100-0V
101-0V
115 -0V
124-1,81V
na
19 -0V po włączeniu 1,92V i spada do 0V
90 -0V po włączeniu 3,3V i spada do 0V

Re: HP Pavillon 15 brak reakcji na power.


by Google Adsense [BOT] 16 December 2023, 13:33
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.