• Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by ppgg1 16 January 2024, 16:15
Pacjent jak w tytule, brak reakcji na włącznik oraz brak napięć, bardzo mocno grzeje się RT6256B. Wymieniłem układ na nowy niestety nic się nie zmieniło, nowy również bardzo mocno się grzeje.

Pomiar z zamontowanym układem:
PIN_11 (LDO3) 55 kOHM
PL_201 130 kOHM
PIN_1 4.9V
PIN_5 19V
PIN_11 1.7V
Na pozostałych pinach układu (poza 4 i 8) RT6256B rezystancje powyżej kOHM

Image

Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by Google Adsense [BOT] 16 January 2024, 16:15

#2 Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by matic 16 January 2024, 21:15
Hello!

Measure the resistance to ground on cathode (pin 1) of diode DU12.

#3 Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by ppgg1 17 January 2024, 22:09
Measure the resistance to ground on cathode (pin 1) of diode DU12.


PIN_1 DU12 (cathode) 1.8 kOHM
PIN_2 DU12 (anode) 55 kOHM

#4 Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by matic 18 January 2024, 08:29
Measure the resistance to ground on pin 9 of chip PU202.
If the resistance is high (in kΩ range or greater), remove this chip from the board and inject 3.3V from the laboratory power supply to the pad 11 on the place of this chip. Limit the current to 0.8A.
What electrical current flows from the laboratory power supply during the test?

#5 Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by ppgg1 21 January 2024, 22:53
After applying 3.3V voltage to PIN_11, there was an overload (photo_1).
I found a very hot capacitor (photo_2 and photo_3), its resistance was 400 Ohm. After dismantling the capacitor, the overload disappeared (photo_4).

Please identify the damaged capacitor.
Can I put the old PU202 on for a test run or is it better to buy a new one?

Image
Image
Image
Image

#6 Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.  [SOLVED]


by matic 22 January 2024, 16:22
Damaged capacitor is as follows:
CU103= 1µF/6.3V, ceramic type X5R, package 0201

#7 Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by ppgg1 24 January 2024, 23:01
The laptop works, thanks for your help.

Re: Acer N17H2 na płycie NX8106_MB_V5 problem z RT6256B.


by Google Adsense [BOT] 24 January 2024, 23:01

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.