• Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

It is currently 14 December 2024, 05:58

 [SOLVED] Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by ARSiq • 17 January 2024, 15:57
I got this board after someone droped a screw on it with battery conected. Result is in picture.
Image
I replaced PU4501, repaired missing track and now i have 3,3V. KBC was overheating, so i repleced it too.
I have 3,3V, 5V, 1.05V, but after pressing power switch all i get is orange LED near power connector, working only as long as switch is pressed. DCBATOUT is only 12V on power supply, or 16 on battery, so i changed PU4401 too. Did not help. All tranzistors around it are OK.
Any advice please.
TIA Matus.

Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by Google Adsense [BOT] • 17 January 2024, 15:57

#2 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by matic • 18 January 2024, 16:59
Hello!

Measure the resistances to ground on all coils.

#3 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by ARSiq • 19 January 2024, 11:01
PL4501 9,4K
PL4701 10 ohm
PL4802 6,3 ohm
PL4801 6,3 ohm
PL5001 35 ohm
PL5201 47,5 ohm
PL4401 52k
PL5101 570ohm
PL4502 56k

#4 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by Machine • 19 January 2024, 11:40
Measurements taken after pressing the power on button.
Measure the voltages on pins 4, 18, 27, 36, 52, 122, 128 of KBC.
Measure the voltages on pin 126 of the KBC in the following cases:
to power OFF
with power on pressed
to power "ON".

#5 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by ARSiq • 19 January 2024, 14:32
Pin 4 3,3V in all cases
Pin18 1,18V in all cases
Pin27 3,3V in all cases
Pin36 3,27 in all cases
Pin52 0,55V in all cases
Pin122 2,88 in all cases
Pin128 3,2V in all cases

#7 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by ARSiq • 19 January 2024, 15:47
resistane 99,4k
PIN 8 PU5101 0V in all states
U4001
1 3,3V
3 0V
5 0V
8 3,3V
14 0V
in all states

#8 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on  [SOLVED] 

by matic • 19 January 2024, 16:24
- Measure the voltages to ground on both pins of quartzs X1802, X2401 (if both are present). It's best to measure it with an oscilloscope, if you don't have it, measure with a multimeter.
- Measure the voltage to ground on pin 3 of diode D2503.
Diode D2503 pinout:
Image
- Measure the voltages to ground on pins 5, 25, 29, 30, 31, 54, 66, 69, 88, 121 of KBC chip.

- Measure the voltages to ground on pins 52, 127 of KBC chip in the following cases:
a) Power button released.
b) Power button pressed.

#9 Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by ARSiq • 22 January 2024, 15:56
Suddenly i have short on 5V rail. 2 chips gone. Im done with it, throwing it in trash.
Thank you very much for your time and help.

Re: Dell Latitude 3500 Bolt-L UMA MB 17938-1 wont power on

by Google Adsense [BOT] • 22 January 2024, 15:56
Similar Topics
  DELL Latitude E5450 MB ZAM70 LA-A901 - urwane pady od gniazda taśmy włącznika power  [SOLVED]
  Dell Vostro 3500 mb: LA-K032P po wymianie CPU nie widzi dysków na złączu m2
  [BIOS DUMP REQUEST] Dell Vostro 3500 mb: LA-K032P po wymianie CPU nie widzi dysków na złączu m2
[BIOS DUMP] Dell OptiPlex 7460, MB: Pegatron IPCFL-GL, Rev: A00, UMA wersja
Schemat Dell Inspiron 5420 Wistron ODIN N ADL DDR4 UMA MB 213264
  Dell G3 15 3500 Problem z TPM  [SOLVED]

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.