• Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by matrixmm 20 February 2024, 16:59
Cześć, próbuję ożywić płytę core_combo_B2 v. 2.2
Płyta miała zwarcie od razu po podpięciu zasilacza. Uszkodzony był charger BQ24715 PU5802. Wypalił nawet jeden pad (n.2 ACP).
Podmieniłem charger. Zwarcia nigdzie nie zaobserwowałem. Zasilacz awaryjny zasila poprawnie 19V. Pobór prądu znikomy poniżej 0.1A. Niestety charger nie działa prawidłowo. Napięcie +PWR_SRC wynosi ok 5V.
Poniżej pomiary rezystancji i napięcia na chargerze.
Będę wdzięczny za wszelką pomoc.

PU5802
1 - 590kΩ / 19V
2 - 590kΩ / 19V
3 - 500kΩ / 18,5V
4 - INF / 21V
5 - 84kΩ / 1,5V
6 - 61kΩ / 3V
7 - 860kΩ / 0V
8 - 20kΩ / 0,8V
9 - 20kΩ / 0,8V
10 - 87kΩ / 3,8V
11 - 3,8MΩ / 0,8V
12 - 1,2MΩ / 4,6V
13 - 1,2MΩ / 4,6V
14 - GND
15 -205kΩ / 0V
16 - 91kΩ / 5V
17 - 4MΩ / 6,4V
18 - 1,4MΩ / 4,6V
19 - 1,1MΩ / 4,6V
20 -300kΩ / 5,2V

Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by Google Adsense [BOT] 20 February 2024, 16:59

#2 Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by matic 21 February 2024, 11:17
Hello!

- Measure the resistance to ground on coil PL5800.
- Measure the resistance to ground on pin 8 of transistor PQ9531.
- Measure the voltages to ground on pins 1, 4, 8 of transistors PQ5103, PQ5931.

#3 Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by matrixmm 24 February 2024, 11:14
matic wrote:- Measure the resistance to ground on coil PL5800.

PL5800 - 600kΩ
matic wrote:- Measure the resistance to ground on pin 8 of transistor PQ9531.

I don't have it on the schematic
matic wrote:- Measure the voltages to ground on pins 1, 4, 8 of transistors PQ5103, PQ5931.

PQ9531
1,2,3 - 105kΩ
4 - INF
5,6,7,8 - 300kΩ

PQ5103
1,2,3 - 160kΩ
4 - 92kΩ
5,6,7,8 - 106kΩ

#4 Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by matic 24 February 2024, 12:22
matrixmm wrote:
matic wrote:- Measure the resistance to ground on pin 8 of transistor PQ9531.
I don't have it on the schematic
Sorry, my fault. I mean PQ5931.

matrixmm wrote:
matic wrote:- Measure the voltages to ground on pins 1, 4, 8 of transistors PQ5103, PQ5931.
PQ9531
1,2,3 - 105K
4 - INF
...
You didn't specify the measurement units, so we don't know what these measurements are. "105K" means nothing. If "K" is a prefix and means "kilo", it must be written in lowercase letters.
But "105k" may still mean different things, for example 105kg, 105kV, 105kF, 105kΩ, 105kA, ... so edit your previous post with the measurement units.
If I were to guess, I'd say it's resistance measurements, but I ask for voltages.

#5 Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by matrixmm 24 February 2024, 13:03
matic wrote:You didn't specify the measurement units, so we don't know what these measurements are. "105K"...

Thanks for paying attention. I corrected all of them.
matic wrote:If I were to guess, I'd say it's resistance measurements, but I ask for voltages.

I'am, sorry, my fault.

PQ9531
1,2,3 - 19V
4 - jumps between 4V-7V
5,6,7,8 - 18,8V

PQ5103
1,2,3 - 19V
4 - 1,7V
5,6,7,8 - 19V

Edit:
I noticed that the PR5800 has 19V on both legs. However, on n.20 of the PU5802 there is 5V. This led me to the damaged PR5825 resistor. I'll look for one and solder it.

Edit 2:
Beautiful :)
After replacing the PR5800, the board works. The 3V/5V converter started normally. The disc starts up. The screen backlight doesn't work yet, but it may be the matrix's fault.
Last question, is 9V on PL5800 ok? is +PWR_SRC=9V ok?

#6 Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC  [SOLVED]


by matic 25 February 2024, 13:20
matrixmm wrote:Last question, is 9V on PL5800 ok? is +PWR_SRC=9V ok?
Yes, that's perfectly fine.

#7 Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by matrixmm 25 February 2024, 14:47
Thank you very much for your help and valuable advice. The computer is working. I'm closing the topic.

Re: Dell Latitude 5404 płyta core_combo_B2 niskie napięcie +PWR_SRC


by Google Adsense [BOT] 25 February 2024, 14:47

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.