• Acer H6510BD Projector - Wont turn on / Keeps crashing

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Acer H6510BD Projector - Wont turn on / Keeps crashing


by Spenbarkley 24 June 2024, 16:05
So I got this Projector because some company wanted to throw it away as it just won't turn on when pressing the power button.

Here are my observations:
    - The red power LED is always on and (only sometimes) the red LEDs for lamp and temp also light up.
    - When the lamp and temp LEDs light up, they don't light up consistently and seem to flicker at a high rate (around 50Hz).
    - The flickering makes the LEDs appear dimmer than expected.
    - The projector has suddenly worked at some point, but it kept crashing when I tried watching a movie on it.
    - I was able to figure out that the lamp was in use for about 5 hours from the menu.
    - Now it's back to the power LED on but no response.
    - Whenever it crashed, it was immediate, meaning the whole thing was instantly without power. I didn't touch it when that happened.
    - Visibly, there is no damage on the PCBs or any other part.

I'm a beginner, so it would be nice to know where to start measuring/looking. I accidentally touched a big transistor while trying to measure some voltage, which wasn't a pleasure. :?
So before I hurt myself further, I thought I'd ask for help.

Image

Image

Image

Image

Re: Acer H6510BD Projector - Wont turn on / Keeps crashing


by Google Adsense [BOT] 24 June 2024, 16:05
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.