• HP Elitebook 840 nie uruchamia się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 HP Elitebook 840 nie uruchamia się


by darole 24 June 2024, 08:29
HP Elitebook 840 G1
MB: 6050A2560201-MB-A02
KBC: MEC1322-NU
CPU: SR1ED

Mam problematyczny przypadek laptopa HP Elitebook 840 G1. Po podłączeniu zasilania migają równocześnie dioda we włączniku i CapsLock.
Stwierdziłem że pływa mocno napięcia za tranzystorem Q6010 co może powodować miganie powyższych diod. Posprawdzałem półprzewodniki w układzie ładowarki i nie namierzyłem uszkodzonych elementów. Wymieniłem układ ładowarki BQ24736. Bez zmian.

Pomiary napięć:
Posiłkowałem się schematem ładowarki podobnego laptopa (840 G2 6050A2637901-MB-A02):
Image

BQ24736 (wiele napięć pływa):
1 17-19V
2 17-19V
3 17-19V
4 23-26V
5 0-1V
6 2,63V
7 0V
8 3,38V
9 3,38V
10 3,37V
11 0V
12 1-3V
13 1-3V
14 0V
15 0V
16 6V
17 5,8V
18 1-3V
19 1-3V
20 17-19V

Q6010
D 12,8-19,7V
S 19,68V
G 6-14V

Q6011
D 14-19V
S 12,8-19,7
G 0-19,7V

Q6012
D 1,3-3,9V
S 14-19V
G 12,9-19,7V

Mam też oscylogramy:
Q6010_G:
Image
Q6010_D:
Image
Q6011_G:
Image
Q6011_D:
Image
Q6012_G:
Image
Q6012_D:
Image

Te piki powtarzają się co 1,4s
Gdzie szukać przyczyny tych prób załączenia. Zwarć na dławikach nie namierzyłem.

Re: HP Elitebook 840 nie uruchamia się


by Google Adsense [BOT] 24 June 2024, 08:29

#3 Re: HP Elitebook 840 nie uruchamia się


by darole 25 June 2024, 05:30
Resistor R6018 is ok and it has 4,3k Ohm resistance. But there was a missing connection between R6018 and the 4 pin of BQ24736 (ACDRV). I corrected this with a thin wire, the oscillograms changed but the voltage peaks are still visible.

Q6011_G:
Image
Q6011_D:
Image

#5 Re: HP Elitebook 840 nie uruchamia się


by darole 25 June 2024, 21:19
L6100 -> 14k -> 3,38V and oscillates slightly downwards
L6150 -> 23k -> 5,1V and oscillates slightly downwards
L6000 -> 50k -> 0,83V
L6200 -> 366 Ohm -> 0V
L6600 -> 80 Ohm -> 0V
L6350 -> 11,1k -> 0V
L6300 -> 3,1k -> 1,05V
L6450 -> 746 Ohm -> 1,28V
L400 -> 700 Ohm -> 0V
L2550 -> 3,8k -> 3,38V and oscillates slightly downwards

#7 Re: HP Elitebook 840 nie uruchamia się


by darole 28 June 2024, 06:43
42 pin of KBC : 0 to 2,4V
Image

pin 2 of JACK6000 - LIMIT_SIGNAL: 0 to 2,3V

U6200. pins:
1 1,05V
15 3,9V to 19,9V
18 2,2V to 5V
20 2,2V to 5V
22 1,05V
24 0V
25 0V
26 2V
28 1,7V to 3,4V

When measuring the voltage on pin 42 of the KBC, I accidentally shorted pin 42 with pin 41 (on which the voltage also floats from 0V to 3.7V).
This causes the board to turn on with the correct voltages and corect image on DisplayPort output every time after holding it for a few seconds.

#9 Re: HP Elitebook 840 nie uruchamia się


by darole 28 June 2024, 10:48
63 pin of KBC: oscillates from 0V to 3,44V

Q6009:
G: oscillates from 0V to 19,3V
Image
S : oscillates from 0V to 6,1v (most time) and even to 18,4V for a moment
Image
D : oscillates from 6V to 10V
Image

Q6013:
G: oscillates from 0V to 3,34V
Image
S: oscillates from 0V to 3,34V
Image
D: oscillates from 0V to 19,8V
Image

#11 Re: HP Elitebook 840 nie uruchamia się


by darole 1 July 2024, 05:43
As I mentioned at the outset - when power is applied, the LED on the switch and CapsLock flash simultaneously.
Current: oscillates from 4,75mA to 12,58mA without pressing start button.
When I start the board by short-circuiting pins 41 and 42 of the KBC, the board draws a stable 460mA with a momentary drop to stable 12mA during a reboot.

Re: HP Elitebook 840 nie uruchamia się


by Google Adsense [BOT] 1 July 2024, 05:43
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.