Forum rules: Click here to view the forum rules
- Topic title should contain: the device's manufacturer, full model and the brief description of problem.
- Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
- Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
- Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
- It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
- Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
Re: Asus K513e prośba o identyfikację tranzystora PQL8702
by Google Adsense [BOT] • 21 August 2024, 15:42
Remove the coil PL8702 from the board and measure the resistances to ground on both pads on the place of this coil.
If the low resistance is present on the system side of coil (power rail "+3VA_DSW"), inject 3V from the laboratory power supply to this pad.
What electrical current flows from the laboratory power supply during the test?
If the low resistance is present on the system side of coil (power rail "+3VA_DSW"), inject 3V from the laboratory power supply to this pad.
What electrical current flows from the laboratory power supply during the test?
Rozlutowanie układu ze zdjęcia nie za wiele dało, to samo PU8803 (spadek o kilka omów). Zwora PSL8706 nie namierzona.
Ale namierzyłem też zwarcie na kondensatorach PC8304, po rozlutowaniu zwory PJP8304, zwarcie ustępuje. Próba zwarciowa nic nie pokazuje, ale z dostępnego mi boardview wynika, że napięcia idą na procesor??
Ale namierzyłem też zwarcie na kondensatorach PC8304, po rozlutowaniu zwory PJP8304, zwarcie ustępuje. Próba zwarciowa nic nie pokazuje, ale z dostępnego mi boardview wynika, że napięcia idą na procesor??
#12 Re: Asus K513e prośba o identyfikację tranzystora PQL8702 [SOLVED]
by matic • 24 August 2024, 11:47
dir wrote:Próba zwarciowa nic nie pokazuje, ale z dostępnego mi boardview wynika, że napięcia idą na procesor??What is an actual resistance to ground on shorted pad of jumper PJP8304?
True, this power rail goes to the APU hybrid. The low resistance on 3V power rail (coil PL8702) is also very likely caused by the APU, so the APU hybrid is unfortunately damaged almost for sure.
Re: Asus K513e prośba o identyfikację tranzystora PQL8702
by Google Adsense [BOT] • 24 August 2024, 12:14
Who is online
Users browsing this forum: No registered users and 2 guests
_______________________________All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.