plenrusldeituk
  • Samsung UE43TU8005K enters protection after changing the LED strips

Forumsregeln:Die Forumsregeln lesen

  1. Der Titel des Themas sollte Folgendes enthalten: den Hersteller der Maschine, das vollständige Modell und die kurze Beschreibung des Fehlers.
  2. Die Themennachricht sollte enthalten: einen PCB-Markierungscode (im Falle von Hardware-Reparaturen), erweiterte Beschreibung des Fehlers, Was wurde überprüft/ersetzt/gemessen + Schlussfolgerungen und, die Frage. Wenn Sie keinen PCB-Markierungscode finden können, du solltest lesen DIESES THEMA. Wenn Sie immer noch keine PCB-Markierungscode finden können, laden Sie bitte ein sauberen Fotos von beiden Seiten des Motherboards - ist es erforderlich, alle Filme und Module zu entfernen, die möglicherweise diese Markierungen abdecken könnte.
  3. Bevor Sie ein neues Thema veröffentlichen, sollten Sie alle Themen im Unterforum AUSBILDUNGEN lesen und machen Sie eine vorläufige Diagnose basierend auf dem Inhalt dieser Ausbildungen.
  4. Das Hochladen vollständiger Anweisungen/Schaltpläne oder BIOS-Dateien / Firmware (oder das Verlinken auf andere Websites mit solchen Dateien) ist STRENG VERBOTEN. Sie können nur den kleinen Teil der Anweisung/Schaltplans oder den Link zur BIOS-Datei in UNVERIFIZIERTE BIOS-DATEIEN platzieren, der die Diagnose und Reparatur für den Themenautor vereinfacht. Sie können nicht mehr als eine vollständige Seite mit Anweisungen/Schaltplänen pro einzelnem Thema platzieren. Die Datei darf keine sichtbaren Wasserzeichen, "vertraulichen" Markierungen, E-Mail-Adressen usw. enthalten.
  5. Pro Thema darf nur eine fehlerhafte Maschine beschrieben werden. Für jede nächste Maschine sollten Sie ein neues Thema öffnen.
  6. Das Anfordern von Schaltplänen, Boardview, MB-Fotos, BIOS-Dateien oder Servicehandbüchern ist STRENG VERBOTEN. Wenn Sie irgendwelche von denen fragen wollen, sollten Sie ein neues Thema in DOKUMENTATION UND BIOS/EFI ANFRAGE Sub-Forum öffnen.

#1 Samsung UE43TU8005K enters protection after changing the LED strips


von Zemog 5 Dezember 2024, 12:23
I have the Samsung UE43TU8005K TV which came with a backlight fault (everything worked fine but it couldn't be seen) and after checking, it had a LED strip in bad condition.
All the LED strips have been dismantled and replaced with new ones.
After the change, when plugging in the TV for a second the LEDs flash intensely and the TV protects itself and turns off. It's as if I was putting more voltage or current into the LED strips.
The new strips are tested and work correctly.
If I turn on the TV without the LED strips connected, it turns on without problems but it can't be seen logically because there is no lighting.
If I turn on the TV without connecting the power supply to the MAIN so that the strips stay permanently on, it causes the intense flash fault and turns off.
The power supply is the Model L43S6_TDY (BN44-01053A) and the backlight controller is MAP3621.
How can I regulate it?

Bild

Bild

Bild

Re: Samsung UE43TU8005K enters protection after changing the LED strips


von Google Adsense [BOT] 5 Dezember 2024, 12:23

#2 Re: Samsung UE43TU8005K enters protection after changing the LED strips


von matic 7 Dezember 2024, 20:09
Hello!

Please, post a picture of the old (original) and new LED strips you installed.

#3 Re: Samsung UE43TU8005K enters protection after changing the LED strips


von Zemog 11 Dezember 2024, 13:01
Bild

Bild

Bild

Bild

Bild

#4 Re: Samsung UE43TU8005K enters protection after changing the LED strips  [GELÖST]


von matic 12 Dezember 2024, 09:06
Test the old and new LED strips with a backlight LED tester. Check, if the tester shows the same forward voltage in both cases.
Bild

#5 Re: Samsung UE43TU8005K enters protection after changing the LED strips


von Zemog 12 Dezember 2024, 15:14
All the new strips were tested with the LED tester before being assembled, and they all had the same voltage 27V, just like the only old LED strip that was in good condition.

Anyway, I went to check them again, and I found a small mark in the connector area. I connected the LED strips and a spark came out from bad contact between the connector and the LED strip.
Since they are new, I have directly changed them for another one from another batch and this one will be returned to the seller.
Thank you very much for your help. Problem solved and TV working

Re: Samsung UE43TU8005K enters protection after changing the LED strips


von Google Adsense [BOT] 12 Dezember 2024, 15:14

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste

_______________________________
Alle Rechte vorbehalten. Das unerlaubte Kopieren des Inhalts dieser Website oder eines Teils davon ist strengstens untersagt.
Alle auf dieser Website veröffentlichten Marken, Markennamen, Produkte oder Dienstleistungen gehören ihren gesetzlichen Eigentümern, sind urheberrechtlich geschützt und werden nur zu Informationszwecken verwendet.