• Soundbar Philips TAB8805/10. Uszkodzony zasilacz

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Soundbar Philips TAB8805/10. Uszkodzony zasilacz


by pokokolo 20 January 2025, 13:23
Witam. Soundbar jak w tytule, w zasilaczu wystrzelony U1 (brak możliwości odczytania- jedynie początek OB5....) oraz elementy wokół niego.
Nie jestem pewien czy dam radę go naprawić po takim wystrzale ale chętnie bym spróbował.
Teraz zgodnie z zasadami działu o schemat mam zapytać w "ZAPYTANIA O DOKUMENTACJE/BIOS" czy tutaj aby nie dublować tematów?
Ogólnie sam soundbar po podaniu 12V uruchamia się.
Na naklejce pisze że moc tego soundbara 35W czyli jak jest 35W/12V to mogę zastosować zewnętrzny zasilacz ok. 3,5A?
Oznaczenia na płytce
PW2028 REV1.0 2019.12.23
94V-0
CQC12134071193
Image
Image
Pozdrawiam

Re: Soundbar Philips TAB8805/10. Uszkodzony zasilacz


by Google Adsense [BOT] 20 January 2025, 13:23

#2 Re: Soundbar Philips TAB8805/10. Uszkodzony zasilacz


by matic 20 January 2025, 16:49
pokokolo wrote:brak możliwości odczytania- jedynie początek OB5....
Hello!
The missing part of the chip is probably in one piece and it most likely lies somewhere inside the device. Try to find it.

pokokolo wrote:Teraz zgodnie z zasadami działu o schemat mam zapytać w "ZAPYTANIA O DOKUMENTACJE/BIOS" czy tutaj aby nie dublować tematów?
I'm pretty sure that the service documentation for this device is currently unavailable.

pokokolo wrote:Na naklejce pisze że moc tego soundbara 35W czyli jak jest 35W/12V to mogę zastosować zewnętrzny zasilacz ok. 3,5A?
Yes, you can as long the original power supply does not have any enable or other control input.

Re: Soundbar Philips TAB8805/10. Uszkodzony zasilacz


by Google Adsense [BOT] 20 January 2025, 16:49

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.