• Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.


by carrneiro 31 January 2025, 15:42
Witam.
Mam wyrwane gniazdo w płycie od PS5.
Nie mam pojęcia nawet co to za gniazdo. Dostałem samą płytę. Patrząc w internecie to chyba jest od napędu.
Nie zajmuję się naprawą konsol.
Czy ktoś ma wiedzę gdzie lecą te 2 środkowe piny? Można to skrobać obok nich czy jednak idą w jakąś środkową warstwe?
Pozdrawiam.
Image

Re: Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.


by Google Adsense [BOT] 31 January 2025, 15:42

#2 Re: Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.


by Vogelek23 31 January 2025, 15:48
Dwa środkowe piny to jest masa. I tak, to jest gniazdo zasilania napędu (pionowe).

#3 Re: Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.


by carrneiro 31 January 2025, 16:17
Czyli rozumiem odbudowywuję zewnętrzne 2szt i po temacie?
Aż za proste się wydaje :D

#4 Re: Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.  [SOLVED]


by Vogelek23 31 January 2025, 17:25
Musisz zdrapać soldermaskę z przelotek, zaznaczonych na czerwono i przylutować zewnętrzne piny do nich, natomiast wewnętrzne wystarczy połączyć do masy płyty (żółte linie). Oczywiście gniazdo trzeba będzie jakoś zamocować, aby połączenia nie popękały (drgania od wentylatora, przenoszenie konsoli itd.). Moim zdaniem najlepiej przykleić gniazdo klejem dwuskładnikowym, a potem wykonać połączenia i zabezpieczyć wszystko soldermaską - im dokładniej to zrobisz, tym dłużej konsola będzie działała.
Image

#5 Re: Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.


by carrneiro 1 February 2025, 13:31
Zrobione.
Wszystko ładnie działa.
Dzięki za pomoc!

Re: Jakaś PS5. Płyta EDM-010. Wyrwane gniazdo.


by Google Adsense [BOT] 1 February 2025, 13:31

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.