• MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue

Regole del forum:Clicca per leggere le regole del forum

  1. Il titolo dell'argomento deve contenere: marca e modello completo del dispositivo e la breve descrizione del problema.
  2. Il messaggio di argomento dovrebbe contenere: un identificatore PCB (in caso di riparazioni hardware), descrizione estesa del problema, cosa è stato controllato/sostituito/misurato, eventuali conclusioni e la domanda. Se non riesci a individuare un identificatore PCB, leggi QUESTO ARGOMENTO. Se non riesci ancora a individuare un identificatore PCB, invia foto chiare di entrambi i lati della scheda madre; è necessario rimuovere qualsiasi pellicola o altri elementi che potrebbero coprire questo identificatore.
  3. Prima di pubblicare un nuovo argomento, leggere tutti gli argomenti nel subforum CORSI e fare una diagnosi preliminare basata sul contenuto di questi corsi.
  4. È VIETATO caricare diagrami completi, file BIOS / firmware o qualsiasi altro tipo di documentazione (o collegarsi a siti Web con tali file). Puoi caricare solo una piccola parte della documentazione o collegarti al file del BIOS nel subforum BIOS FILE NON VERIFICATI. Non è consentito caricare più di una pagina completa di istruzioni/diagrami per singolo argomento. Il file che carichi non deve contenere filigrane, contrassegni "Riservati", link o indirizzi email e non può essere protetto da password.
  5. È consentito descrivere un solo dispositivo difettoso per singolo argomento - dovresti sempre aprire un nuovo argomento per ogni dispositivo successivo.
  6. La richiesta degli diagrami completi, dei file BoardView, dei file BIOS o di qualsiasi altro tipo di documentazione NON È CONSENTITA in questo subforum. Se hai bisogno di chiedere uno di questi, dovresti aprire un nuovo argomento nel subforum DOCUMENTAZIONE E RICHIESTA BIOS/EFI.

#21 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 30 gennaio 2025, 10:40
In the Bios is possible to identify SSD M2
After booting by an USB with OS when it ask where install OS SSD M2 is not recognised
How can I solve?

Re: Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da Google Adsense [BOT] 30 gennaio 2025, 10:40

#22 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da tekort 30 gennaio 2025, 11:18
Go into BIOS and turn AHCI mode for SATA\PCIe devices - then You do not need any drivers

If You want to use RAID or Intel Optane then there is option for RST/IRST in BIOS. If You have it choosen, then You need to download driver for the disk controller from laptop manufacturer site to have it visible during installation.

This is the link to manual: https://www.msi.com/faq/notebook-1995

#23 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 30 gennaio 2025, 12:02
Ok
But now SSD M2 is recognized by the bios but boot with a OS USB when it ask whrere install OS no one SSD is recognized
Is it possible to flash bios?

"Go into BIOS and turn AHCI mode for SATA\PCIe devices - then You do not need any drivers"

ok I will try

#24 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da tekort 30 gennaio 2025, 12:36
You do not need to flash anything. If you choose in BIOS to use the VMD/RST/IRST mode, then the Windows installer needs the additional driver to "see" the disk with the use of this controller. This driver is not a part of Windows, it is provided by Intel most often or AMD.

In AHCI mode you do not need to install driver, but also you cannot use VMD/RST/IRST functions such as RAID, Optane memory etc.

#25 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 30 gennaio 2025, 13:54
In meantime the Machine shut off.
No mosfet issue.
With PSU connected I get 3,2V instead of 19,5
No power on with battery too.
Now motherboard is inside, I have to pull it out it again.

I have pulled out the mobo but no clear signs of damaged components
Connecting PSU always 3,2V

#26 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da matic 31 gennaio 2025, 10:54
Measure the voltages to ground on pins 1, 4, 5 of transistors PQ23, PQ30.

#27 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 31 gennaio 2025, 17:08
PQ23
PIN 1= 415 k ohm
Pin 4= 177 k ohm
Pin 5= 408 k ohm

PQ30
Pin 1 = 40 k ohm
Pin 4= 270 k ohm
Pin 5= 408 K ohm

19V Line change from 4,30V to 2,65V continuously

#28 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da matic 3 febbraio 2025, 09:59
I asked about the voltage measurements, not resistances.

#29 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 3 febbraio 2025, 15:49
Sorry

After plugging PSU voltages are fluctuating.
After 5 min.

PQ23
PIN 1= 3,15V
Pin 4= 1,32V
Pin 5= 2,90V


PQ30
Pin 1 = 2,45V
Pin 4= 2,40V
Pin 5= 2,90V

#30 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da matic 4 febbraio 2025, 12:09
Inject 1V from the laboratory power supply to any pin of resistor PR330. What electrical current flows from the laboratory power supply in this case?

If the current consumption is low (in the mA range), rise up the voltage to 3V and check the electrical current again.

#31 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 4 febbraio 2025, 19:44
1V=0A
3V= 0A

#32 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue  [RISOLTO]


da matic 5 febbraio 2025, 09:50
The power supply you used to test the laptop is very likely damaged. Test the machine with another power supply.

#33 Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da valieromarco 6 febbraio 2025, 01:45
Hello
Was the connector of laboratory PSU
Now pc works again but I will keep it on for two days to try it and before closing the topic.

Ok I tried it for 2 days
Thank you so much for helping.

Re: MSI PULSE GL66 motherboard MS 15811 ver: 1.1 charging issue


da Google Adsense [BOT] 6 febbraio 2025, 01:45

Chi c’è in linea

Visitano il forum: Nessuno e 0 ospiti

_______________________________
Tutti i diritti riservati. È severamente vietata la copia non autorizzata del contenuto di questo sito Web o di qualsiasi sua parte.
Eventuali marchi, nomi di società, prodotti o servizi pubblicati su questo sito Web appartengono ai legittimi proprietari, sono protetti da copyright e utilizzati solo a scopo informativo.