• Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

It is currently 9 March 2025, 23:46

Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by Zemog • 21 February 2025, 17:29
Hello everyone!
I have a Lenovo V15-IGL with NM-D201 GV452/GV552 motherboard, which when connecting the power supply, only the Power Led turns on and does nothing else.
With the motherboard removed, without battery and nothing connected (only motherboard), when connecting the power supply the consumption is 50mA.
I have measured the voltages in the coils and all the voltages are correct and present, except PL6601 (+CPU_CORE), where the value is 0V. I have measured the resistance with respect to ground: 40 Ω

I have measured the following voltages on PU6601:
Pin 7 (VCC)... 5V
Pin 11 (VSYS) ... 13,95V
Pin 52 (VIN_CT) ... 19,80V
Pin 16 (SYSON) ... 3,34V
Pin 15 (SUSP#) ... 3,34V
Pin 36 (ALW_PGOOD) ... 3,35V
Pin 27 (SYS_PWROK) .... 3,35V
Pin 45 (+VNN) ... 1,05V
Pin 24, 37 (+1,05VS) ...1,05V
Pin 26, 28 (+1,8VALW) ... 1,8V
Pin 18,21 (+1,2VALW) ... 1,2V
Pin 20 (Gate_VIN) ... 3,35V
Pin 19 (Gate VOUT) .... 2,48V
Pin 3 (+VTT) ... 0,59V
Is the value of pin 3 (+VTT) correct?

On UE1 I have measured the following pins:
Pin 11 (VCC)... 3,34V
Pin 26,50,92,114, 121 (+3VL_EC) ... 3,3V
Pin 74 (+3VL_EC_R) .... 3,3V
Pin 97 (EC_RSMRST#) ... 3,34V
Pin 82 (SYS_PWROK) ... 3,35V
Pin 98 (ALW_PGOOD) ... 3,36V

I initially extracted the SPI Bios (UC2) to make a backup copy, but during the reading, it gave me an error. The programmer recognizes the chip, but every time I try to read it, it gives an error.
I have changed it for a new one, and the new chip, when recording the dump, at the end has given me an error on 2 occasions. The third time it was recorded correctly. After soldering everything remains the same.

Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by Google Adsense [BOT] • 21 February 2025, 17:29

#2 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by matic • 24 February 2025, 07:50
Zemog wrote:The programmer recognizes the chip, but every time I try to read it, it gives an error.
Hello!
Which programmer do you use?

#3 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by Zemog • 24 February 2025, 12:11
matic wrote:Which programmer do you use?


TL866 II PLUS

EDIT: I have tested the programmer on another computer and I was able to read the BIOS without any problems.
I am going to program a new Dump from this new computer and I will test if there are any changes.

#4 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by tekort • 24 February 2025, 12:50
I have the exact one with the same problem. I also had problems with this chip, mostly during "Verify" phase on SVOD. After programming the BIOS, despite verifying failing, the chip was programmed correctly and the device works. The DMI section for this model is 483000 to 484FFFF.

#5 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by Zemog • 24 February 2025, 13:43
tekort wrote:The DMI section for this model is 483000 to 484FFFF


Do I have to copy the data from that section, from the backup to the new dump?

#6 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by tekort • 24 February 2025, 14:15
If you want to keep the original serial number you should copy this section from original one to the new dump. It is not mandatory, because device will work without it but in BIOS and in any Lenovo software the serial numbers will have a "INVALID" note.

#7 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by Zemog • 24 February 2025, 17:42
Ok. Thanks a lot for the info, it's very useful for me

After reprogramming I have re-soldered the BIOS, but the problem remains the same. When I connect the power, the power led turns on automatically, and the consumption goes up to 50 mA.
If I keep the power button pressed (which is located on the keyboard), the power led turns off, but the consumption remains at 50 mA. As soon as I release the power button, the power led turns on again with the same consumption
Any suggestions?

#8 Re: Lenovo V15-IGL NM-D201 GV452/GV552 Turn on the power LED and nothing else

by matic • 24 February 2025, 21:09
Based on the symptoms you described, the communication between the KBC chip and PCH part (small core) of the APU hybrid is almost certainly missing.
Unfortunately, the APU hybrid is very likely damaged.

Similar Topics
Schemat Lenovo V15 G4 LCFC KV482&KV582 NM-F511
Asus MAXIMUS XII APEX r1.01BX RED LED DOES NOT TURN ON
HP 840 G8 doesnt turn on- orange LED blinks 10 times
LENOVO YOGA 900-13ISK2 NM-A921 NO POWER
Lenovo P51 płyta DP510 NM-B041 mrugnie dioda power
  Lenovo T460, NM-A581 Brak obrazu, obecna dioda power oraz wentylator.  [SOLVED]

Who is online

Users browsing this forum: No registered users and 9 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.