• Monitor ViewSonic vx2235wm-4 uszkodzony zasilacz.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Monitor ViewSonic vx2235wm-4 uszkodzony zasilacz.


by Hybrid 11 December 2012, 01:13
Witam.
Podjąłem próbę naprawy zasilacza od monitora Viewsonic vx2235wm-4.
Uszkodzony był LD7575 i kilka części w koło niego.
Po wymianie uszkodzonych elementów na nowe i sprawdzeniu pozostałych, zasilacz dalej nie startuje.
LD7575 Pozostaje w trybie off i nie steruje tranzystorem.
Napięcia LD7575:
Pin 6 - 9.7v (według datasheet powinno być około 16v)
Pin 8 - 330v
Wymienione:
C801
R806
R807
R809
R833-R836
Q801
Z803
Proszę o pomoc.
Image

Re: Monitor ViewSonic vx2235wm-4 uszkodzony zasilacz.


by Google Adsense [BOT] 11 December 2012, 01:13

#2 Re: Monitor ViewSonic vx2235wm-4 uszkodzony zasilacz.


by zbyszkok 11 December 2012, 02:20
A tlp jest sprawny ?

#3 Re: Monitor ViewSonic vx2235wm-4 uszkodzony zasilacz.


by amorphe 11 December 2012, 08:06
Dodatkowo do sprawdzenia i ewentualnej wymiany C810 oraz profilaktycznie do wymiany D807.
Rezystor R811 sprawny ?
Jeszcze pytanie, czy kolega sprawdza zasilacz solo ze sztucznym obciążeniem, czy podpięty pod resztę monitora ?

#4 Re: Monitor ViewSonic vx2235wm-4 uszkodzona przetwornica.


by Hybrid 11 December 2012, 10:40
Tlp sprawny, R811 i C810 wymieniony. Sprawdzam sam zasilacz. Brak napięć po stronie wtórnej.
Dorzucam schemat całego zasilacza i inwertera.

Image

Image
Według datasheet, Ld7575 Pinem 6 ma ładować kondensator c810 i po osiągnięciu ok 16v układ zaczyna sterować tranzystorem.
Jednak na pinie 6 jest tylko 9v.
Co może być przyczyną?

Re: Monitor ViewSonic vx2235wm-4 uszkodzona przetwornica.


by Google Adsense [BOT] 11 December 2012, 10:40

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.