• PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 31 March 2018, 13:55
Witam,

problem mam z konsolą jak w temacie, płyta KTE-001. Konsola trafiła do mnie z uszkodzonym gniazdem HDMI. Gniazdo wymieniłem - brak obrazu. Wymieniłem dwa razy układ Panasonic MN8647091, bez efektu. Na pinie 18 gniazda HDMI (+5V power) mam 5V więc poprawnie. Na pinach 15 i 16 (clock i data) mam również 5V ale zauważyłem, że po podłączeniu kabla na pinie 15 spada do 4,8V (nie wiem czy to ma znaczenie). Na liniach danych TMDS nie mam w ogóle żadnego zasilania a wydaje mi się że tam powinno być 3V.

Nie mam schematu do tej płyty, nie wiem do jakiej linii zasilania i przez co są podciągnięte linie zegara i danych na pinach 15 i 16. Czy ktoś bardziej doświadczony w konsolach jest w stanie mi pomóc z tą płytą?

Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Google Adsense [BOT] 31 March 2018, 13:55

#2 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 31 March 2018, 14:10
Hello!

Please, post a clear picture of the HDMI part (Panasonic MN chip and HDMI port).

#3 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 31 March 2018, 14:59
Image
Image
Image
Image

#4 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 31 March 2018, 18:26
What is this on the following picture?! It seems like a broken paths to me.

Image

#5 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 31 March 2018, 18:40
No no, the pahts are fine. I scraped the soldermask to try to trace down the paths. Can you tell me how the Panasonic IC is powered?

#6 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 31 March 2018, 18:51
First measure the resistances directly on all five diodes, which are highlighted on the following picture.

Image

#7 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 5 April 2018, 09:16
Resistances or diode mode readings?

#8 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 5 April 2018, 15:42
Slaw wrote:Resistances or diode mode readings?
Resistances.

#9 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 5 April 2018, 16:13
Just to be clear: resistances between diodes and ground?

#10 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 5 April 2018, 18:54
Slaw wrote:Just to be clear: resistances between diodes and ground?
No.
Resistances between both pins of diodes. One test lead to cathode, another one to anode of each diode (the polarity of test leads is not important).

#11 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 5 April 2018, 19:22
Image

The one marked on the picture have 10k in both ways (polarity). All others have infinity in one way and 116k on the other way.

#12 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 10 April 2018, 12:03
Hello, do you have some ideas?

#13 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 28 April 2018, 21:13
Sorry, I missed your post.

Check, if you get video on "AV MULTI OUT" via RCA cable.

Image

#14 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 30 April 2018, 12:01
Yes, i have a proper image on AV Multi, composite and component as well.

#15 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by patol 30 April 2018, 13:39
Możesz zamieścić dokładne zdjęcie obszaru ze zdrapaną soldermaską? Dla mnie też to wyglada na uszkodzone ścieżki jak pisze matic. Potwierdza to fakt ze masz obraz na AV out.

#16 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 30 April 2018, 18:29
Ale obrazu na HDMI nie było już przed zdrapaniem soldermaski, zdrapałem ją w drodze diagnostyki, ścieżki są całe.

#17 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 30 April 2018, 19:02
Have you tried to change the resolution on the console?
If not connect the console via HDMI to the TV, press and hold the power button on console until to the second "beep" (Red standby led -> press and hold the power button -> first "beep" -> hold cca 5 seconds -> second "beep" -> release the power button).

#18 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Slaw 1 May 2018, 00:16
Yes i have, at the very first :)

#19 Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by matic 1 May 2018, 10:52
Check the continuity between listed points (marked on the following picture):
1) Between point A and point A'
2) Between point B and point B'
3) Between point C and point C'
4) Between point D and point D'
5) Between point E and point E'
6) Between point F and point F'
7) Between point G and point G'
8) Between point H and point H'

Image

P.s.: It would be perfect, if you have an old (bad) HDMI cable. If so, cut off one end and measure the continuity between TMDS signal wires and points A', B', C', .... , H'.

Re: PS3 Slim CEH-3004B płyta KTE-001 - brak obrazu przez HDMI


by Google Adsense [BOT] 1 May 2018, 10:52
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.