• PS4 Power Supply (ADP-240AR AA) - standby voltage is present, missing 12V

It is currently 14 December 2024, 03:31

PS4 Power Supply (ADP-240AR AA) - standby voltage is present, missing 12V

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 PS4 Power Supply (ADP-240AR AA) - standby voltage is present, missing 12V

by RafiManch • 26 August 2024, 12:23
Hello Everyone,
I am looking for help to resolve the problem. I can hear relay's click but 12V is not present.
Fuses and transistors are all good. The only problem what I could see was resistor R509 (10 Ohm) being burnt. My suspect was IC32. I have replaced chip and added new resistor. Result was the same. Single relay's click and new resistor R509 has burnt. I hope someone with more experience in fixing power supplies can help me to find what is causing problem in this one.
Image
Image
Image
Image
Image
Thanking you in advance.
Regards,
Rafal

Re: PS4 Power Supply (ADP-240AR AA) - standby voltage is present, missing 12V

by Google Adsense [BOT] • 26 August 2024, 12:23

#2 Re: PS4 Power Supply (ADP-240AR AA) - standby voltage is present, missing 12V

by matic • 28 August 2024, 10:52
Hello!

- Check the diodes D83, ZD31.
- Measure the resistances to ground on pins 5, 14, 16 of chip IC32.

Re: PS4 Power Supply (ADP-240AR AA) - standby voltage is present, missing 12V

by Google Adsense [BOT] • 28 August 2024, 10:52
 This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).
Similar Topics
Zasilacz PS4 ADP-200ER Nie załącza się , brak 12V
  Zasilacz PS4 ADP-200ER pali bezpiecznik  [SOLVED]
  Marshall stanmore II Identify value of resistors in power supply  [SOLVED]
ADP-400FR prośba o identyfikację
Subwoofer JBL SUB125 - nie uruchamia się, ciągle świeci dioda "standby"
Płyta główna AT Soyo 6BB i uszkodzone zasilanie 12V wentylatora procesora

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.