• PS4 PRO NVG-001 BLOD nie działa USB

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 PS4 PRO NVG-001 BLOD nie działa USB


by tomek533 12 August 2021, 14:42
Konsola wyświetla BLOD , nie działa USB . Zauważyłem ze zaznaczona na rysunku kość pamięci się mocno grzeje (Samsung K4G41325FC-HC25) . Czy wystarczy wymienić jedna ?


Image

Re: PS4 PRO NVG-001 BLOD nie działa USB


by Google Adsense [BOT] 12 August 2021, 14:42

#2 Re: PS4 PRO NVG-001 BLOD nie działa USB


by matic 12 August 2021, 21:23
tomek533 wrote:Zauważyłem ze zaznaczona na rysunku kość pamięci się mocno grzeje (Samsung K4G41325FC-HC25) . Czy wystarczy wymienić jedna ?
Hello!
Yes, replace the hot RAM chip. Then check that the temperatures on all RAM chips are the same.

#3 Re: PS4 PRO NVG-001 BLOD nie działa USB


by tomek533 12 August 2021, 21:38
so i can run consol without one RAM chip ? I wanted also ask about this . This RAM chip must have that same all numbers to work good ?

#4 Re: PS4 PRO NVG-001 BLOD nie działa USB


by Vogelek23 13 August 2021, 11:12
tomek533 wrote:so i can run consol without one RAM chip ?
Nie.

tomek533 wrote:This RAM chip must have that same all numbers to work good ?
Tak.

#5 Re: PS4 PRO NVG-001 BLOD nie działa USB


by Solderstation 13 August 2021, 13:47
Image
Mam cos takiego różni się końcówka u mnie jest hc03
Miałem kiedyś taki przypadek że konsola nie chciała przyjąć systemy okazało się że wadliwa byla któraś kość ramu wymieniłem na kość innej firmy elpidan bo takie też były używane konsola wstała

Re: PS4 PRO NVG-001 BLOD nie działa USB


by Google Adsense [BOT] 13 August 2021, 13:47
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.