• Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.

It is currently 8 January 2025, 11:55

 [SOLVED] Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.

by jokerssxx • 4 December 2018, 09:56
Witam
Proszę o pomoc w identyfikacji elementów:
płyta zasilacza ORTP-760(SM-2)-Q20.
Po wymianie KA5Q1265RF oraz wypalonych diod ZD01, ZD03 oraz D07 (zaznaczone na zdj.) zasilacza na złączu CN1 przez chwilę pojawia się 35V i od razu powoli spada. Nie wiem czy wymieniłem na prawidłowe.
Co to za elementy ZD01, ZD03 i D07?
Image

Re: Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.

by Google Adsense [BOT] • 4 December 2018, 09:56

#2 Re: Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.  [SOLVED] 

by xamledyD • 4 December 2018, 10:10
Witam.
ZD01 - MTZJ4.7B
ZD03 - MTZJ9.1C
D07 - UF4007
Pozdrawiam

#3 Re: Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.

by jokerssxx • 4 December 2018, 11:43
Bardzo dziękuję za pomoc!

Re: Samsung HT-TZ215 brak 34,5V na CN01. Wypalone diody.

by Google Adsense [BOT] • 4 December 2018, 11:43
Similar Topics
  Laptop Acer Aspire 3 A315-34 - identyfikacja elementu  [SOLVED]
Citroen C5 2.0 16V - migające zielone diody w liczniku lub brak podświetlenia.
Acer E5-574G (DA0ZRWMB6G0 REV:G) - brak reakcji, brak 3/5V
Lenovo Legion Y530-15ICH płyta NM-B701 rev: 1.0 wypalone pady pod PL101 i PL102
Samsung np350v QCLA4 LA-8861P - brak napięcia na Vcc kości bios
  Imac A2116, płyta: 820-01237-A zwarty kondensator na linii 5v  [SOLVED]

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.