• ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by spider9991 26 December 2024, 18:25
Witam czy wie ktoś jak przestawić oporniki i zworki by włączyć JTAG w Lenovo P50

Re: ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by Google Adsense [BOT] 26 December 2024, 18:25

#2 Re: ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by Vogelek23 26 December 2024, 19:12
1. Przesunąć zwory R94, R95, R103 i R104 w miejsca R600, R601, R602 i R603.
2. Zamontować rezystory R604, R605, R606 i R607 - 10kΩ.
3. Przesunąć rezystor R435 w miejsce R434.

#3 Re: ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by spider9991 28 December 2024, 18:24
Witam nie wiem co robię nie tak? Przestawiłem oporniki jak w opisie dodałem pozostałe dodałem 10k jak w opisie pod mikroskopem , podłączyłem do svod4. I z napięciem na zasilaniu laptopa i bez i programator nie widzi układu :(

#4 Re: ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by Vogelek23 28 December 2024, 23:27
spider9991 wrote:dodałem 10k jak w opisie
Spróbuj zdjąć te rezystory R604-R607 (10kΩ) i sprawdź, czy układ zostanie wykryty.

#5 Re: ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by spider9991 30 December 2024, 13:40
Witam zrobiłem wszytko według instrukcji i mam tylko komunikat not detected
Image

Re: ThinkPad P50 BP500 NM-A451 Rev: 1.0 MEC1653-BA1 JTAG jak włączyć ?


by Google Adsense [BOT] 30 December 2024, 13:40

Who is online

Users browsing this forum: No registered users and 5 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.