• Transcoding NTSC to PAL-M-for XBOX 360 console

It is currently 8 January 2025, 12:47

 [SOLVED] Transcoding NTSC to PAL-M-for XBOX 360 console

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Transcoding NTSC to PAL-M-for XBOX 360 console

by eletmoraes • 9 July 2014, 21:17
Wanted to set up a circuit to transcode the video game XBOX-360 from NTSC to PAL-M, is it possible?

Chciałem ustawić obwód przejść grę wideo Xbox 360 NTSC na PAL-M, jest to możliwe?

Re: Transcoding NTSC to PAL-M-for XBOX 360 console

by Google Adsense [BOT] • 9 July 2014, 21:17

#2 Re: Transcoding NTSC to PAL-M-for XBOX 360 console  [SOLVED]

by mar244 • 9 July 2014, 22:57
Hello,

Unfortunately, you can not change the region, the only way is to rework on jtag / rgh.

#3 Re: Transcoding NTSC to PAL-M-for XBOX 360 console

by pocinas • 10 July 2014, 09:15
Nie da rady zmienić przestroić na Pal. Tylko montaż RGH tobie to da. Plusy RGH odpalanie gier ntsc i pal, granie bez płyt, używanie jakiego kolwiek dysku do 2TB maksymalnie. Minus to brak możliwości grania po xboxlive.

Wysłane z mojego GT-I9100 przy użyciu Tapatalka

Re: Transcoding NTSC to PAL-M-for XBOX 360 console

by Google Adsense [BOT] • 10 July 2014, 09:15
Similar Topics
  Identyfikacja rezystora XBOX ONE S  [SOLVED]
  XBOX Series S - brak obrazu  [SOLVED]
  Xbox Series X - identyfikacja elementu  [SOLVED]
  Pad XBOX ONE 1697 - prośba o identyfikację elementu  [SOLVED]
Xbox one 1540 wyłącza się po 1-2 sekundach
Schemat Microsoft XBOX Series S M1147169 STOCKTON

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.