Forum rules: Click here to view the forum rules
- Topic title should contain: the device's manufacturer, full model and the brief description of problem.
- Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
- Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
- Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
- It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
- Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).
Re: Zamiennik Mitsumi 463A dla PS3
by Google Adsense [BOT] • 19 August 2016, 23:29
Witam
Nie ma do niego zamiennika. Można kupić tylko na aliexpress za 3,03 dolara.
Jedyna rozpiska z sieci to :
Mitsumi voltage regulator 463A
Pin Signal Description
1 5V_EVER From power supply 5v standby rail (pin 1 of connector CN101)
2 3.3V_EVER_B 3.3v_standby_rail_2
3 ? Goes under package to the black 100 ohm resistor at its right, and from there to syscon SWx-x pin 26
4 ? Goes under package to squared testpad/sinkhole at its right (not connected ?)
5 V ? To a capacitor, and from there to ground
6 ? To squared testpad/sinkhole at its top (not connected ?)
7 GND Ground
8 3.3V_EVER_A 3.3v_standby_rail_1
Być może można w jego miejsce zastosować LM1117-3,3 ale nie jestem pewien bo PS3 jeszcze nie robiłem. Być może trzeba zastosować 2xLM1117
Nie ma do niego zamiennika. Można kupić tylko na aliexpress za 3,03 dolara.
Jedyna rozpiska z sieci to :
Mitsumi voltage regulator 463A
Pin Signal Description
1 5V_EVER From power supply 5v standby rail (pin 1 of connector CN101)
2 3.3V_EVER_B 3.3v_standby_rail_2
3 ? Goes under package to the black 100 ohm resistor at its right, and from there to syscon SWx-x pin 26
4 ? Goes under package to squared testpad/sinkhole at its right (not connected ?)
5 V ? To a capacitor, and from there to ground
6 ? To squared testpad/sinkhole at its top (not connected ?)
7 GND Ground
8 3.3V_EVER_A 3.3v_standby_rail_1
Być może można w jego miejsce zastosować LM1117-3,3 ale nie jestem pewien bo PS3 jeszcze nie robiłem. Być może trzeba zastosować 2xLM1117
Re: Zamiennik Mitsumi 463A dla PS3
by Google Adsense [BOT] • 22 August 2016, 08:06
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).
Who is online
Users browsing this forum: No registered users and 0 guests
_______________________________All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.